Wall Mounting - NEC DT830 Series User Manual

WALL MOUNTING

A wall mount unit (WM-L UNIT) is used to mount all
telephones to the wall. This unit connects to the back
side of the telephone.
Be careful not to drop the telephone set while
WARNING
mounting it on the wall. It can cause injury.
Make sure the telephone set is firmly mounted
on the wall to prevent the telephone set from
falling out. It can cause injury.
To mount the telephone set on the wall, the following
space is required.
117.5
136
30 (approximately)
83.5
Space for
Modular terminal
To mount the telephone set on the wall, use the
following procedure.
DT830 DT430/410
25 (approximately)
Tab Slots
60
60
15 (approximately)
35 (approximately)
All dimensions in mm
Telephone
(In the case of 12D/24D)
STEP 1: Mount the hanger of the handset upside
down.
Remove the hanger from the handset once.
Turn it upside down and then insert the hang-
er until you hear it clicks.
STEP 2: Turn the telephone set upside down and wid-
en the tilt leg.
STEP 3: Attach WM-L UNIT to the wall directly or the
wall plate.
- When attaching WM-L UNIT to the wall
directly:
Secure WM-L UNIT with the six screws (in-
cluded with the telephone set) or hang WM-L
UNIT on the wall with the two screws (pur-
chased separately) inserted into the wall.
32
Handset Hanger
Telephone