NEC DT830 Series User Manual page 89

3
STEP 15:Select Server Address.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
3
• Press key.
[Backup/Restore]
1
Data Backup
2 Data Restore
3 Server Address
4
Protocol
5
FTP Settings

STEP 16:Enter an IP address of the destination FTP/
TFTP server. For example, to set the IP ad-
dress of 10.41.208.205, enter 10*41*208*205
[separate with an asterisk (*)].
[Server Address]
'*'For'.'
.
BK
After entering an IP address, press
OK soft key.
, and then press
Back OK
1
. .
Back OK
or
STEP 17:The display goes back to the Backup/Re-
store screen. Select
Select an item by either of the following operations.
• Highlight an item by using
,
or OK soft key.
• Press
[Backup/Restore]
1 Data Backup
2 Data Restore
Server Address
3
4
5
FTP Settings
STEP 18:The default file name will be displayed as fol-
lows:
[Data Backup]
Input a folder name.
PersonalData.tgz
BK
Note:
Do not change the extension of the backup file.
The setting data of the telephone can only be
backed up as a.tgz file.
Note: When changing the default file name, press BK
soft key once to delete the default file name and
then enter a new file name by using the digits
keys.
81
1
Data Backup.
, and then press
1
key.
Protocol
 Back OK
A
Enc
Cancel Exec
,