Call Forwarding - All Calls - NEC Univerge SV9300 Series User Manual

CALL FORWARDING - ALL
CALLS
This feature allows all calls directed to a particular
extension to be rerouted to an alternate
destination, regardless of the busy or idle status of
the extension.
TO SET CALL FORWARDING -
ALL CALLS
This feature is set by Soft key or feature key.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
1. Press the Soft key (>>>>) repeatedly
until display shows "FDA" when
Soft key is used.
MARY SMITH
4:26 PM MON 11 MAY 2015
FDA FDN
2. Press Soft key (FDA) or Call
Forwarding - All Calls feature key.
Forward to :
4:26 PM MON 11 MAY 2015
Recall PICK
3. Dial the desired target terminal
number.
SET
4:26 PM MON 11 MAY 2015
4. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Speaker key lamp goes off. →
Line key lamp goes off. →
TO VERIFY
1. Press Soft key (FDA) or Call
Forwarding - All Calls feature key.
The terminal number of the forwarding
destination is displayed on the LCD.
[200]
>>>>
_
>>>>
201
78
TO CANCEL
1. While being set the Call Forwarding
- All Calls,
2. Press the Soft key (>>>>) repeatedly
until display shows "FDA" when
Soft key is used.
MARY SMITH
4:26 PM MON 11 MAY 2015
FDA FDN
3. Press Soft key (FDA) or Call
Forwarding - All Calls feature key.
Forward to :
4:26 PM MON 11 MAY 2015
Recall PICK
4. Press .
CANCEL
4:26 PM MON 11 MAY 2015
5. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Speaker key lamp goes off. →
Line key lamp goes off. →
FEATURE OPERATION
[200]
>>>>
201
>>>>