DAY/NIGHT MODE
CHANGE BY STATION
DIALING
This feature allows selected terminals to activate a
change from day mode to night mode by dialing a
special code.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2.
Dial Day/Night Mode Change access
code or press Day/Night Mode
Change feature key.
4:26 PM MON 11 MAY 2015
Recall
PICK
3.
Press
-
mode.
•
Press
for DAY mode.
SET
4:26 PM MON 11 MAY 2015
•
Press
for NIGHT mode.
SET
4:26 PM MON 11 MAY 2015
•
Press
for MODE-A mode.
SET
4:26 PM MON 11 MAY 2015
•
Press
for MODE-B mode.
SET
4:26 PM MON 11 MAY 2015
DAY
>>>>
and set in various
NIGHT
MODE-A
MODE-B
4.
Press Speaker key.
Speaker key lamp goes off. →
If a programmable key is used lamp
indication will be,
•
Night Mode = Red lamp on
•
Mode-A = Red lamp flashing (60 ipm)
•
Mode-B = Red lamp flashing (120 ipm)
89
FEATURE OPERATION