Call Forwarding - No Answer - NEC Univerge SV9300 Series User Manual

CALL FORWARDING - NO
ANSWER
When a call is placed to a terminal that does not
answer, this feature forwards the call to another
terminal.
TO SET CALL FORWARDING -
NO ANSWER
The Soft key that is used as Call Forwarding
- No Answer is same as Call Forwarding -
Busy Line (Soft key (FDN)).
This feature is set by Soft key or feature key.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
1. Press the Soft key (>>>>) repeatedly
until display shows "FDN" when
Soft key is used.
MARY SMITH
4:26 PM MON 11 MAY 2015
FDA FDN
2. Press Soft key (FDN) or Call
Forwarding - No Answer feature key.
Forward to :
4:26 PM MON 11 MAY 2015
Recall PICK
3. Dial the desired target terminal
number.
SET
4:26 PM MON 11 MAY 2015
4. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Speaker key lamp goes off. →
Line key lamp goes off. →
[200]
>>>>
_
>>>>
201
77
TO VERIFY
1. Press Soft key (FDN) or Call
Forwarding - No Answer feature key.
The terminal number of the forwarding
destination is displayed on the LCD.
TO CANCEL
1. While being set the Call Forwarding
- No Answer,
2. Press the Soft key (>>>>) repeatedly
until display shows "FDN" when
Soft key is used.
MARY SMITH
4:26 PM MON 11 MAY 2015
FDA FDN
3. Press Soft key (FDN) or Call
Forwarding - No Answer feature key.
Forward to :
4:26 PM MON 11 MAY 2015
Recall PICK
4. Press .
CANCEL
4:26 PM MON 11 MAY 2015
5. After 4 second, return back to the
idle screen automatically. (or Press
Speaker key)
Speaker key lamp goes off. →
Line key lamp goes off. →
FEATURE OPERATION
[200]
>>>>
201
>>>>