Table of Contents
Advertisement
Technical data
Dimensions (DxWxH)
60 x 60 x 85 cm
Weight
approximately 35 kg
Max. capacity
7 kg
approx. 4.2 l
Condensation container
Ambient temperature
5 - 35 °C
Connection voltage
220 - 240 V
Connected load
2025/2600 W
10 A / 16 A
Fuse protection
Product number
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
Specifications are average values established under normal
operating conditions. Fluctuations of up to 10 % are possible.
Cottons 7 kg
Cupboard Dry*
1400
1000
800
Iron Dry*
1400
1000
800
Easy-Care 3.5 kg
Cupboard Dry*
800
600
*Test programmes according to DIN EN 61121.
**The values may diverge from those specified depending on over and
undervoltage, fabric type, composition of the laundry to be dried, residual moisture
in the fabric and the amount of the load.
Optional accessories
Washer-dryer stack connection set
WTZ
The dryer can be placed on top of a suitable washing machine with the same width and depth
11311
to save space. The dryer must be fastened on the washing machine with this connection set.
If the worktop of the washing machine is less than 544 mm deep, please consult the
after-sales service or your specialist retailer.
Platform
WMZ
For improved loading and unloading. The basket located in the drawer can be used for
20460
carrying laundry.
Built-under installation
WTZ
A metal cover must be fitted by a specialist instead of the appliance's covering plate.
10295
Rating plate or inside of the door
Spin speed in rpm
Drying time** in
(residual moisture)
min incl. 8 min
cooling time
10 A
16 A
(approx. 50 %)
98
90
(approx. 60 %)
117
106
(approx. 70 %)
138
120
(approx. 50 %)
76
66
(approx. 60 %)
91
82
(approx. 70 %)
106
96
(approx. 40 %)
42
40
(approx. 50 %)
53
45
(order from the after-sales service using the order number)
What to do if ...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed after-sales service directory, or by calling one of these numbers:
– GB 0844 8928979 (Calla from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
– IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to O (Off) and remove the appliance plug from the socket.
Start/Stop indicator lamp does
not light up.
/
(Container/Cleaning)
indicator lights up.
/
(Container/Cleaning)
indicator light flashes.
Dryer does not start.
Energy
consumption**
in kWh
10 A
16 A
Programme terminated shortly
after the start.
3.32
3.32
Water is leaking out.
3.92
3.92
The door opens by itself.
4.48
4.48
2.45
2.45
The required degree of dryness
was not achieved or the drying
2.94
2.94
time was too long.
3.43
3.43
1.16
1.16
1.45
1.45
Laundry damp.
The humidity in the room has
increased significantly.
One or more indicator lights are
flashing.
Power failure.
9
Mains plug plugged in?
Programme selected?
Empty container for condensation
see page 4.
Clean the fluff filter
see page 4.
Clean the air cooler, if required
see page 6.
Has the
Start/Stop button been pressed?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
Make sure the dryer is level.
Push the door closed until you hear it engage.
Clean the fluff filter
see page 4.
Empty the container for condensation.
Ambient temperature higher than 35 °C
room.
Air inlet may be blocked
clear obstruction.
Unsuitable programme selected?
see page 7.
Dryer installed too closely to other objects? Provide
adequate air circulation.
Mains failure
Restart the dryer.
Fine layer of limescale on the moisture sensors. Clean the
sensors
see page 6.
Use the next drying programme up or use the timed
programme as a supplement
see page 7.
Warm laundry feels damper than it really is!
Make sure the room is sufficiently ventilated.
Air inlet blocked?
Clear obstruction.
Make sure that the air cooler is inserted.
Clean the fluff filter and air cooler
see page 4/6.
Check the installation conditions
see page 8.
Switch off, allow to cool, switch back on and restart the
programme.
Remove the laundry from the dryer immediately and
spread it out. Heat may escape.
ventilate the
10
Advertisement
Table of Contents
