Panasonic Viera TX-P42GT50Y Operating Instructions Manual page 44

Menu Item
Manual Tuning
Update Channel
List
Favourite Network
New Channel
Message
Service
Replacement
Signal Condition
Antenna System
LNB Configuration
Attenuator
Add TV Signal
OSD Language
Preferred Audio
1 / 2
Preferred Subtitles
1 / 2
Preferred Teletext
44
Adjustments / Configurations (alternatives)
Searches for the channels manually (p. 54)
Updates the channel list while keeping your settings (p. 55)
●
For DVB mode
Selects your favourite network for each broadcasters (only available in some
countries)
●
For DVB-C or DVB-T mode
Selects whether to give a notification message when a new channel is found
[Off] / [On] (p. 55)
●
For DVB mode
Set to [On] to enable a message to switch to the available service (only available
in some countries) [Off] / [On]
● For DVB-C mode
Checks the signal condition (p. 55)
●
Not valid on Analogue mode
Sets the antenna system to use plural LNBs for receiving several satellites
[One LNB] / [MiniDiSEqC] / [DiSEqC 1.0] / [Single Cable] (p. 48)
●
This TV supports DiSEqC Version 1.0.
●
For DVB-S mode
Selects the satellite for each LNB (p. 48)
●
For DVB-S mode
Automatically reduces the DVB-C signal to avoid the interference [Off] / [On]
●
If the DVB-C signal is too strong, the interference may occur. In this case set to
[On] to reduce the signal automatically.
Adds the TV mode
●
This function is available if you skip any modes to tune in [Auto Setup] for first
using the TV.
● To operate, refer to the "Auto Setup" operations for first using the TV (p. 15).
Changes language for on-screen displays
Selects the first and second preferred language for DVB multi audio (depending
on the broadcaster)
Selects the first and second preferred language for DVB subtitles (depending on
the broadcaster)
●
To display subtitles (p. 21)
Selects the preferred language for DVB teletext service (depending on the
broadcaster)