Kenwood BL330 series Instructions

●
Use your blender for soups, Children should be supervised to
sauces, drinks, pâtés, mayonnaise, ensure that they do not play with
dressings etc. Use your mill (if the appliance.
●
supplied) for milling herbs, nuts Only use the appliance for its
and coffee beans. intended domestic use. Kenwood
will not accept any liability if the
safety
appliance is subject to improper
use, or failure to comply with these
●
Allow all liquids to cool to room
instructions.
temperature before placing in the
before plugging in
blender.
Make sure your electricity supply is
●
Switch off and unplug:
the same as the one shown on the
before fitting or removing parts
● ●
underside of the machine.
● ● after use
● ● before cleaning.
Important – UK only
●
Keep hands and utensils out of the
●
The wires in the cord are coloured
blender when it's on the power
as follows:
unit.
Blue = Neutral, Brown = Live.
●
Don't touch the sharp blades.
●
The appliance must be protected
●
Never use a damaged machine.
by a 3A approved (BS1362) fuse.
Get it checked or repaired: see
'service and customer care'.
Note:
●
Never use an unauthorised
●
For non-rewireable plugs the fuse
attachment.
cover MUST be refitted when
●
Never leave the machine on
replacing the fuse. If the fuse cover
unattended.
is lost then the plug must not be
●
When removing the blender or mill
used until a replacement can be
from the power unit:
obtained. The correct fuse cover is
● ● wait until the blades have
identified by colour and a
completely stopped;
replacement may be obtained from
don't accidentally unscrew the
● ●
your Kenwood Authorised Repairer
jug or jar from the blade unit.
(see Service).
●
Smoothie recipes - never blend
●
If a non-rewireable plug is cut off it
frozen ingredients that have
must be DESTROYED
formed a solid mass during
IMMEDIATELY. An electric shock
freezing, break it up before adding
hazard may arise if an unwanted
to the goblet.
non-rewireable plug is
●
Misuse of your blender can result
inadvertently inserted into a 13A
in injury.
socket outlet.
●
This appliance is not intended for
●
This appliance conforms to EC
use by persons (including children)
directive 2004/108/EC on
with reduced physical, sensory or
Electromagnetic Compatibility and
mental capabilities, or lack of
EC regulation no. 1935/2004 of
experience and knowledge, unless
27/10/2004 on materials intended
they have been given supervision
for contact with food.
or instruction concerning use of
before using for the first
the appliance by a person
time
responsible for their safety.
1 Remove all packaging.
2 Wash the parts: see 'cleaning'.
key blender only
●
Don't put dry ingredients into the
blender
blender before switching on. If
filler cap
necessary, cut them into pieces;
lid
remove the filler cap; then, with the
jug
machine running, drop them
sealing ring
through one by one. Keep your
blade unit
hand over the opening. Empty
power unit
regularly.
cord storage ●
Don't use the blender as a storage
mill (if supplied)
container. Keep it empty before
blade unit
and after use.
sealing ring ●
Never blend more than 1 litre (1
jar
pints) – less for frothy liquids like
sprinkler lid
milk shakes.
to use your blender mill only
Use for dry ingredients only.
1 Fit the sealing ring into the blade
hints
unit.
●
When making mayonnaise, put all
2 Screw the jug onto the blade unit.
the ingredients, except the oil, into
3 Put your ingredients into the jug.
the blender. Then, with the
4 Put the filler cap in the lid, then
machine running, pour the oil into
turn.
the filler cap and let it run through.
5 Screw the lid onto the jug so that
●
Thick mixtures, eg pâtés and dips,
the thumb tab is over the handle.
may need scraping down. If it's
(To unscrew the lid, push the
difficult to process, add more
thumb tab .)
liquid.
6 Place the blender onto the power
●
When crushing ice, add 15ml
unit and turn to lock .
(1 tbsp) water to 6 ice cubes.
7 Switch on.
Operate the blender in short
Important
bursts.
blender and mill
to use your mill
●
To ensure long life of your blender,
never run it for longer than 60
1 Put your ingredients into the jar. Fill
seconds or the mill for longer than
it no more than half full.
30. Switch off as soon as you've
2 Fit the sealing ring into the blade
got the right consistency.
unit.
●
Don't process spices – they may
3 Turn the blade unit upside down.
damage the plastic.
Lower it into the jar, blades down.
●
The machine won't work if the
4 Screw the blade unit onto the jar
blender or mill is fitted incorrectly.
until it's finger-tight.
5 Place the mill onto the power unit
and turn to lock.
6 Switch on.
7 After milling, you can replace the
blade unit with the sprinkler lid and
shake out your food.
●
The sprinkler lid is not airtight.
3 ⁄
4