Download Print this page
Kenwood BL330 series User Manual

Kenwood BL330 series User Manual

Hide thumbs Also See for BL330 series:

Advertisement

Use your blender for soups,
Important – UK only
G
sauces, drinks, pâtés, mayonnaise,
The wires in the cord are coloured
dressings etc. Use your mill (if
as follows:
supplied) for milling herbs, nuts
Blue = Neutral, Brown = Live.
G
and coffee beans.
The appliance must be protected
by a 3A approved (BS1362) fuse.

safety

Note:
G
CAUTION: Blending very hot
G
For non-rewireable plugs the fuse
liquids may result in hot
cover MUST be refitted when
liquid and steam being
replacing the fuse. If the fuse cover
forced suddenly past the lid
is lost then the plug must not be
or filler cap. Allow the liquid
used until a replacement can be
to cool or reduce the
obtained. The correct fuse cover is
quantity and select a lower
identified by colour and a
speed if available. Protect
replacement may be obtained from
your hands with a cloth or
your Kenwood Authorised Repairer
oven gloves when handling
(see Service).
the hot goblet and lid.
G
If a non-rewireable plug is cut off it
G
Switch off and unplug:
must be DESTROYED
G G
before fitting or removing parts
IMMEDIATELY. An electric shock
G G
after use
hazard may arise if an unwanted
G G
before cleaning.
non-rewireable pug is inadvertently
G
Keep hands and utensils out of the
inserted into a 13A socket outlet.
blender when it's on the power
G
This machine complies with
unit.
European Economic Community
G
Don't touch the sharp blades.
Directive 89/336/EEC.
G
Don't let children or infirm people
use the machine unsupervised.
before using for the first
G
time
Never use a damaged machine.
Get it checked or repaired: see
1 Remove all packaging.
'service'.
2 Wash the parts: see 'cleaning'.
G
Never use an unauthorised

key

attachment.
G
Never leave the machine on
blender
unattended.
filler cap
G
Don't let children play with the
lid
machine.
jug
G
When removing the blender or mill
sealing ring
from the power unit:
G G
wait until the blades have
power unit
completely stopped;
cord storage
don't accidentally unscrew the
G G
mill (if supplied)
jug or jar from the blade unit.
blade unit
G
Only use the machine for its
sealing ring
intended domestic use.
jar
sprinkler lid

before plugging in

Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
to use your blender
machine running, pour the oil into
the filler cap and let it run through.
1 Fit the sealing ring into the blade
G
Thick mixtures, eg pâtés and dips,
unit.
may need scraping down. If it's
2 Screw the jug onto the blade unit.
difficult to process, add more
3 Put your ingredients into the jug.
liquid.
4 Put the filler cap in the lid, then
G
When crushing ice, add 15ml
turn.
(1 tbsp) water to 6 ice cubes.
5 Screw the lid onto the jug so that
Operate the blender in short
the thumb tab is over the handle.
bursts.
(To unscrew the lid, push the
to use your mill
thumb tab
.)
6 Place the blender onto the power
1 Put your ingredients into the jar. Fill
unit and turn to lock
.
it no more than half full.
7 Switch on.
2 Fit the sealing ring into the blade
Important
unit.
blender and mill
3 Turn the blade unit upside down.
G
To ensure long life of your blender,
Lower it into the jar, blades down.
never run it for longer than 60
4 Screw the blade unit onto the jar
seconds or the mill for longer than
until it's finger-tight.
30. Switch off as soon as you've
5 Place the mill onto the power unit
got the right consistency.
and turn to lock.
G
Don't process spices – they may
6 Switch on.
damage the plastic.
7 After milling, you can replace the
G
The machine won't work if the
blade unit with the sprinkler lid and
blender or mill is fitted incorrectly.
shake out your food.
G
The sprinkler lid is not airtight.
blender only
G
Don't put dry ingredients into the
cleaning
blender before switching on. If
necessary, cut them into pieces;
G
Always switch off, unplug and
remove the filler cap; then, with the
dismantle before cleaning.
machine running, drop them
G
Never let the power unit, cord or
through one by one. Keep your
plug get wet.
hand over the opening. Empty
G
Empty the jug before unscrewing it
regularly.
from the blade unit.
G
Don't use the blender as a storage
G
Don't wash any parts in your
container. Keep it empty before
dishwasher.
and after use.
power unit
G
Never blend more than 1 litre (1
3
4
G
Wipe with a damp cloth, then dry.
pints) – less for frothy liquids like
G
Push excess cord inside the back
milk shakes.
of the machine.
mill only
Use for dry ingredients only.
hints
G
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Then, with the

Advertisement

loading

Summary of Contents for Kenwood BL330 series

  • Page 1 2 Fit the sealing ring into the blade replacement may be obtained from Important your hands with a cloth or unit. your Kenwood Authorised Repairer blender and mill oven gloves when handling 3 Turn the blade unit upside down. (see Service).
  • Page 2 – it’s on immediately. the underside of the power unit. spares and attachments call 0870 2413653. other countries Contact the shop where you bought your machine. BL330 series BL335 series Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK www.kenwood.co.uk 10093/2...

This manual is also suitable for:

Bl335 series