Table of Contents
Advertisement
3. Select the time cell block for the start time.
4. Press ENTER or click the left mouse button to
select a recording mode. The color of the cell
blocks will change automatically.
- Gray: No scheduled recording
- Green (Continuous recording): Recording starts
automatically from the preset time.
- Red (Sensor event recording): Recording starts
automatically when the sensor alarm is occurs
within a designated time.
- Blue (Motion event recording): Recording starts
automatically when motion is detected within a
designated time.
- Yellow (Sensor+Motion recording): Recording
starts automatically when the sensor alarm
signal has input or motion has been detected.
- Green+Red (Continuous+Sensor event record-
ing): Recording starts automatically from the
preset time. When the sensor alarm occurs
within a designated time, change the continu-
ous recording mode to sensor event recording
mode and recording starts automatically.
- Green+Blue (Continuous+Motion event record-
ing): Recording starts automatically from the
preset time. When the motion is detected
within a designated time, change the continu-
ous recording mode to motion event recording
mode and recording starts automatically.
- Green+Yellow (Continuous+Sensor+Motion
event recording): Recording starts automati-
cally from the preset time. When the sensor
alarm signal has input or motion has been
detected, change the continuous recording
mode to motion event recording mode and
recording starts automatically.
5. Select the next time cell block of schedule time
cell blocks to confirm the schedule time.
6. Press ENTER or click the left mouse button
repeatedly to select gray to set the time for the
end of the schedule. The settings cell block is
highlighted.
7. Press SETUP/ESC to move to the previous menu.
•
ENTER: Confirm the selection.
•
Press ESC to exit the specific date selection
menu.
31
Advertisement
Table of Contents
