Camera Settings - LG LDV-S503 Owner's Manual

Camera Settings

Camera
The channel name, covert and input audio channel
settings are configured.
Ch: Displays the channel number.
l
Name: Enter the channel name using up to 12
l
characters.
- b/B/v/V: Select a character.
- ENTER: Confirms your selection.
- ESC: Exits the virtual keyboard menu.
Covert: You can set the camera conditions to
l
prevent operation by other users. If the covert
option is set to ON, "LG logo" is displayed on the
live window with POWER or NORMAL user.
Audio: You can hear from the selected input audio
l
channel.
Video Adjustment
Adjust the brightness, contrast and color settings
of each camera channel. You can see the settings
screen from the preview windows.
Channel: Selects the desired channel to adjust.
l
Brightness: Adjust the brightness value from 0 to
l
100 for the selected channel.
Contrast: Adjust the contrast value from 0 to 100
l
for the selected channel.
Color: Adjust the color value from 0 to 100 for the
l
selected channel.
28
PTZ
Settings for the PTZ cameras connected via the data
port of the RS-422/485 terminal.
Channel: Selects the desired channel to set the
l
connected PTZ camera.
Port: Selects the connected data port of the
l
RS-422/485 terminal on the rear panel. The DATA
2 port is used to control the PTZ camera connected
to DVR or to control by using the LKD1000 control-
ler. If you want to use the PTZ camera via DATA
2 port, you should set the DVR ID to NONE on
the system setup menu. If you use the LKD1000
controller to control the DVR via DATA 2 port, you
should set the DVR ID number(1~16) on the sys-
tem setup menu.
Control ID: Selects the PTZ camera ID from 0 to
l
255. Make the same settings as the PTZ camera.
Protocol: Selects the protocol supported by PTZ
l
camera.
Baud Rate: Selects the communication speed.
l
(1200, 2400,4800,9600,19200 or 38400)
PTZ Test: After the PTZ setting, you can test the
l
pan/tilt function for the selected PTZ camera. You
can see the test screen from the preview windows
on the right side of the PTZ test option.
- b / B: Test the pan direction.
- v / V: Test the tilt direction.
Note:
The supported PTZ camera list is on page 71 for
reference.