Mts Broadcast / Tv Stereo System - Panasonic PV-DF2002 Operating Instructions Manual

MTS Broadcast / TV Stereo System

®
Equipped with -TV Noise
Reduction for true MTS
®
reproduction. -TV Noise
Reduction is required for good
stereo separation and audio fidelity.
®
is a registered trademark, and
®
is licensed by Technology
Licensing.
< Example >
STOP
Press AUDIO
STEREO
SAP
MONO
Press AUDIO
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an " " mark while the selected audio mode is indicated
with an arrow. To change the audio mode for these
broadcasts, see the "Select Audio Mode for TV Viewing"
section (below.)
Press DISPLAY to display
the broadcast signal being received.
MTS Stereo and SAP broadcast
ABC
STOP 1 2 : 0 0AM
0 : 0 0 : 0 0
Multi-channel Television Sound Stereo
STEREO SP
SAP
(main language) and Secondary Audio
MONO
Program (sub language) broadcasts are
being received simultaneously.
Select the STEREO or SAP audio mode.
MTS Stereo broadcast
STOP 1 2 : 0 0AM ABC
0 : 0 0 : 0 0
Multi-channel Television Sound Stereo
SP
STEREO
SAP broadcast. Select STEREO audio mode.
MONO
• If stereo broadcast is weak and the
display flickers, select MONO audio
mode for possibly better results.
SAP broadcast
ABC
STOP 1 2 : 0 0AM
0 : 0 0 : 0 0
Secondary Audio Program
SP
STEREO
(sub language).
SAP
MONO
Select SAP audio mode for the sub
language.
MONO broadcast
ABC
STOP 1 2 : 0 0AM
0 : 0 0 : 0 0
Normal monaural sound broadcast.
STEREO SP
SAP
MONO
Audio Mode for TV Viewing
Press AUDIO to select the desired audio mode
as described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown
below.
• "SAP" is selected with first press of AUDIO.
1 2 : 0 0AM ABC
0 : 0 0 : 0 0
SP
ABC
STOP 1 2 : 0 0AM
0 : 0 0 : 0 0
STEREO
SAP
MONO
Press AUDIO
SP
ABC
STOP 1 2 : 0 0AM
0 : 0 0 : 0 0
SP
STEREO
SAP
MONO
23