Tape Operation - Panasonic PV-DF2002 Operating Instructions Manual

Tape Operation

Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.
Index Search
Go directly to the desired recording.
1
Press SEARCH*
I NDEX SEARCH
in Playback or
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS Stop mode to
display INDEX
FORWARD SEARCH : FF
SEARCH screen,
REVERSE SEARCH : REW
NEXT : SEARCH
and then press
EX I T : STOP
NUMBER Keys to
select the
recording number.
• To calculate number,
see below.
Press FF or REW
to start search.
2
Play begins at
I NDEX SEARCH
search end. To
search forward or
back 1 index,
press FF or REW
FORWARD SEARCH : FF
while screen left in
REVERSE SEARCH : REW
displayed (10 sec.).
To cancel, press PLAY or STOP.
To calculate the Index Number
I
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 2 3 4 5
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 2 3 4 7 5
NOTE: indicates start points of each recording.
34
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
6 7
Notes
• Make each entry within 5 minutes,
or the Index Search mode will be
canceled.
6
• If Index Search is started very close
to an index mark, that index mark
may not be counted in the search.
REW FF