Call Options - Panasonic KX-TCD340FX Operating Instructions Manual

Digital cordless answering system
Hide thumbs Also See for KX-TCD340FX:
Table of Contents

Advertisement

TCD340FX(e).book Page 36 Wednesday, June 8, 2005 3:57 PM
Base Unit Settings

Call options

Changing the recall time
Change the recall time, if necessary,
depending on the requirements of your
service provider or PBX.
1
Press $ (middle soft key).
2
Select Z, then press ,.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
37).
4
Select "Call Options", then press
,.
5
Select "Recall", then press ,.
6
Select the desired setting, then press
,.
7
Press {ih}.
Setting pause length
Change the pause length, if necessary,
depending on the requirements of your
service provider or PBX.
1
Press $ (middle soft key).
2
Select Z, then press ,.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
37).
4
Select "Call Options", then press
,.
5
Select "Pause Length", then press
,.
6
Select the desired setting, then press
,.
7
Press {ih}.
36
Storing/changing emergency
numbers
These settings determine which phone
numbers can be dialled while the call bar
feature is on (page 31).
1
Press $ (middle soft key).
2
Select Z, then press ,.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
37).
4
Select "Call Options", then press
,.
5
Select "Emergency No.", then press
,.
6
Select a memory location, then press
,.
L If the memory location already
contains an emergency number, the
number is displayed.
7
Enter/edit the number, then press ,.
L To erase an emergency number, press
and hold {C/T}.
8
Press {ih}.
Setting call restriction
You can restrict the base unit or selected
handsets from dialling certain numbers. Up
to 6 phone numbers can be stored. Storing
area codes here will prevent the restricted
extensions (the base unit or selected
handsets) from dialling any phone number in
that area code.
Important:
L Call restriction can be set using handset 1
only. (To confirm which handset is handset
1, press {x} and {1} on the base unit.
Handset 1 will ring.)
1
Press $ (middle soft key).
2
Select Z, then press ,.
3
Enter "0000" (default base unit PIN).

Advertisement

Table of Contents
loading

Table of Contents