Table of Contents
Advertisement
Audio playback settings
You can make the settings for display at the time of audio
playback of the iPod/iPhone. You can also set the sound
quality for your preference.
Basic operation
1. Press [MENU].
2. Press [e, r, w, q] to select "Audio Menu" and
press [OK].
Menu
Audio Menu
Settings Menu
Select Item
OK
3. Press [e, r] to select the item ( below) and
press [w, q] to select the setting.
4. Press [MENU] to close the menu screen.
Factory settings are indicated with underlines.
Play Mode
Repeat
Audio Information
Equalizer
iPod Information
Note
•
Depending on the track for playback, the equalizer effect
may be less noticeable even if the "Equalizer" setting is
changed.
18
P17
P17
Displays audio information
currently playing while the display
categories other than "iPod
Display" are set.
On: Display
Off: No display
Flat:
When the sound quality effect is
not used.
Heavy:
Emphasises the bass sound with
sharp sound quality.
Clear:
Emphasises the treble range with
clear sound quality.
Displays the model name and
version of the connected
iPod/iPhone.
Using the timer
The power is automatically turned on at the set time and
photos or audio are played. The power is automatically
turned off at the end time.
"Timer 1", "Timer 2" and "Timer 3" can be set.
The following explains the case when setting "Timer 1" as an
example.
•
Set the clock. ( P7)
•
Select the photo category.
•
Prepare playback sources on an iPod/iPhone.
1. Press [MENU].
2. Press [e, r, w, q] to select "Settings Menu" and
press [OK].
3. Press [e, r, w, q] to select "Timer" and press
[OK].
4. Press [w, q] to select "Timer 1 Settings" and
press [OK].
Timer Setting Menu
Timer 1 Settings
Timer 2 Settings
0
3
6
9
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Select Item
OK
5. Press [e, r] to select "Standby" and press [OK].
6. Press [e, r] to select "Enable This Timer" and
press [OK].
7. Press [e, r] to select "Day" and press [OK].
8. Press [e, r] to select the day, add the check
mark with [w, q] and press [OK].
9. Press [e, r] to select "Time" and press [OK].
10. Press [e, r, w, q] to set the start/end time and
press [OK].
11. Press [e, r] to select "Confi rm" and press [OK].
If the operation time overlaps other timer settings,
"The set time overlaps with another timer. Do you
want to give priority to this timer and register it?"
appears.
•
If "Yes" is selected, other timers with the overlapped
time are disabled.
•
If "No" is selected, the previous screen is restored
with the timer setting contents saved.
A
Timer 1 Settings
Standby
Enable
Day
Mon Tue Wed Thu Fri
Time
7 : 00 - 10 : 00
Audio Playback
Off
Confirm
Select Item
OK
A To set audio playback
12. Press [MENU] to close the menu screen.
Timer 3 Settings
12
15
18
21
P19
Advertisement
Table of Contents
