Table of Contents
Advertisement
Using in a wall-mounted state
Attaching to a wall
•
Make sure to turn the unit off and unplug the AC adaptor.
•
Remove the Universal Dock for iPod.
1. Attach the screws for wall-mounting according
to the illustration below.
105 mm
2. Attach the screws for wall-mounting.
Wall
A
A Screw for wall-mounting
B Fix with the screws stuck out 3 mm to 4 mm from the wall.
•
Make sure to attach 2 screws for wall-mounting.
•
Use a level guide, etc. so the screws for wall-mounting
become horizontal when attaching.
3. Connect the AC adaptor to the unit, and then
insert the fi tting for wall-mounting.
D
C Fold the stand part and turn upside down.
D AC adaptor
E Fitting for wall-mounting
4. Hook the main unit on the screws for
wall-mounting with the fi tting for wall-mounting
inserted into the main unit.
Wall
F
F Set the 2 screws fi rmly to this position.
24
53 mm
Wall
B
3 mm to
4 mm
C
E
5. Fix the fi tting for wall-mounting to the wall.
Wall
G
G Make sure to attach 2 screws for the fi tting.
Note
•
The vertical arrangement of the main unit is not available
when using in the wall-mounted state.
When using the unit on a desk after removing
from the wall
1. Select "No" for "Wall-mount Setting" in the setup menu
( P23) and press [OK].
2. Turn the unit off and remove the unit from the wall.
Note
•
When the "Wall-mount Setting" is changed to "No", the
setting automatically returns to the previous state in which
the wall-mount setting was not set.
–
Timer audio playback settings
–
Power Save Settings
–
Panasonic Logo
Advertisement
Table of Contents
