Time Date Adjust; Present Time Display; Recorded Capacity Display Function - Mitsubishi Electric DX-TL2500E Installation And Operation Manual

Basic Operations (continued)
<TIME DATE ADJUST>
DAYLIGHT SAVING
>>DAY
MONTH
YEAR
TIME
6. Turn the JOG dial clockwise to move the cursor (>>) to
"MONTH".
When turning the JOG dial clockwise, the cursor
(>>) moves down. When turning counterclockwise,
the cursor (>>) moves up.
7. Repeat steps 4 ~ 6 to set "MONTH" and "YEAR".
8. Turn the JOG dial to move the cursor (>>) to "TIME" and
turn the SHUTTLE ring clockwise twice.
• The "TIME" display reverses in color when the SHUTTLE
ring is turned the first time. When the ring is turned for the
second time, the display turns red and flashes.
<TIME DATE ADJUST>
DAYLIGHT SAVING
DAY
MONTH
YEAR
TIME
9. Turn the JOG dial to display "18" and turn the SHUTTLE
ring clockwise.
• The setting is confirmed and flashing stops.
<TIME DATE ADJUST>
DAYLIGHT SAVING
DAY
MONTH
YEAR
TIME
The time is indicated using the 24-hour system.
10. Repeat steps 8 and 9 to set "MINUTE" and "SECOND".
11. Turn the SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
<TIME DATE ADJUST>
DAYLIGHT SAVING
DAY
MONTH
YEAR
TIME
12. Turn the SHUTTLE ring counterclockwise.
Relationship between the number of operational cameras and available
Number of operational
cameras
PPS
SHORT
Recording
l
interva
LONG
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
22
OFF
28
01
2003
00:00:00
OFF
28
10
2003
00:00:00
OFF
28
10
2003
18:00:00
OFF
28
10
2003
18:30:00
#1 / #2 #3 / #4 #5 / #6 #7 / #8 #9 / #10 #11 /#12 #13 /#14 #15 /#16
25P 12.5P 8.33P 6.25P
12.5P 6.25P 4.165P 3.125P
8.333P 4.167P 2.777P 2.083P
6.25P 3.125P 2.083P 1.563P
5P 2.5P 1.666P 1.25P
4.167P 2.083P 1.388P 1.042P
3.125P 1.563P 1.041P 0.781P
2.5P 1.25P 0.833P 0.625P
1P 0.5P 0.333P 0.25P
0.5P 0.25P 0.167P 0.125P
0.25P 0.125P 0.083P 0.063P
0.125P 0.063P 0.042P 0.031P

Present time display

When turning on the unit power, the time/date display shown
to the right appears (in the case of DISPLAY MODE 3).
For setting other display modes,
PLAY MODE" page 33.
During recording, the used HDD space is dis-
played. When recording is stopped, the display is
cleared (with the exception of when pausing record-
ing). The HDD usage display appears again after a
few moments when recording is started once more.
INFORMATION
This unit uses 4 digits to display the year. The al-
lowed display range is 99 years between 1/1/2001
~ 31/12/2099. The unit is also equipped with a func-
tion to automatically calculate leap years. The date
returns to the year 2001 after 31/12/2099.

Recorded capacity display function

Day Month Year
01 - 01 - 2003 WED
00 : 00 : 00 12.5P 99% A00001
Minute
Hour Second
This unit displays the used space of the specified record-
ing device (HDD) on the screen when "REMAIN HDD" of
the <REAR TERMINAL SETTINGS> screen is set to
"MAIN", "SUB" and "LPA". The "%" indicates the ratio de-
tected as HDD against the total HDD capacity. The follow-
ing settings are required to enable this function.
1) Select the device and set the remaining capacity using
"REMAIN HDD" of the <REAR TERMINAL SETTINGS>
screen ( see page 53).
2) Select "3" for "DISPLAY MODE" in the <TIME DATE/
DISPLAY SETTINGS> screen (
"PPS" (pictures per second)
3.57P 3.125P
5P 4.17P
2.5P 2.085P 1.785P 1.563P
1.667P 1.39P 1.19P 1.042P
1.25P 1.043P 0.893P 0.781P
0.714P 0.625P
1P 0.834P
0.833P 0.695P 0.595P 0.521P
0.625P 0.521P 0.446P 0.391P
0.357P 0.313P
0.5P 0.417P
0.2P 0.167P 0.143P 0.125P
0.1P 0.083P 0.071P 0.063P
0.05P 0.042P 0.036P 0.031P
0.018P 0.016P
0.025P 0.021P
see "DIS-
Day of Recorded capacity of
the week the Hard Disk
Recording interval
Alarm recording number
see page 33).