Mitsubishi Electric DX-TL2500E Installation And Operation Manual page 93

Warning Display
IMAGE MODIFIED
SYSTEM ERROR
REC/
SYSTEM ERROR
PLAY/
SYSTEM ERROR
COPY/
SYSTEM ERROR
REST/
SYSTEM ERROR
ARCHIVE/
SYSTEM ERROR
REC/RW
COPY/RW
REST/RW
ARCHIVE/RW
MIRROR
<DEVICE ERROR>
LPA : DEVICE ERROR
TEMP
FAN
COPY/OVER(RED)
ARCHIVE/OVER
(RED)
COPY/OVER
(WHITE)
ARCHIVE/OVER
(WHITE)
(NONE)
#2 : (The following numbers are in
0 0 : A (INTERNAL)
0 1 : B (INTERNAL)
0 2 : C (INTERNAL)
1 0 : SCSI ID 0
1 1 : SCSI ID 1
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Warnings and CALL OUT output
Status
• Video data that has been
altered was played back.
• System error has • Reboot.
• Check the HDD/media.
occurred.
• After peripheral recording
device and the unit power off
a power supply, reboot in
order of peripheral recording
device and the unit.
• After peripheral recording
device and the unit power
off a power supply, please
perform the check of a
SCSI cable and termination.
• Error has occurred during
writing of data to
HDD/media.
• One HDD could not be
detected during mirroring.
• Unable to recognize
HDD.
• Unable to recognize
LPA HDD.
• The capacity of LPA HDD
40GB or less.
• Issued when in a high
temperature environment
within the tolerance level.
• The fan stopped.
• HDD recording has
overtaken copy/archive
recording. Copy/archive
recording has stopped.
• HDD recording is about
to overtake copy/archive
recording.
• Reboots by watchdog
operation.
)
1 2 : SCSI ID 2
1 3 : SCSI ID 3
1 4 : SCSI ID 4
1 5 : SCSI ID 5
2 0 : CFC
Countermeasure
• Check the HDD/media.
• After peripheral recording
device and the unit power off
a power supply, reboot in
order of peripheral recording
device and the unit.
• After peripheral recording
device and the unit power
off a power supply, please
perform the check of a
SCSI cable and termination.
• Reboot.
• Reboot.
• Reboot.
• The capacity of LPA HDD
is set to 40GB or more.
• Turn off the power and
change the installation
condition.
• Turn off the power and
stop usage.
• Stop HDD recording to
continue copy/archive
recording.
• Stop HDD recording to
continue copy/archive
recording.
• Stop copy/archive
recording to continue HDD
recording.
#3 : (The following numbers are in
0 1 : CH 1 0 5 : CH 5
0 2 : CH 2 0 6 : CH 6
0 3 : CH 3 0 7 : CH 7
0 4 : CH 4 0 8 : CH 8
CALL OUT
Canceling
Code
the warning
Fixed when
Press the WNG5500
WARNING setting is
"ON"
RESET button.
Press the Fixed
WNG5100
WARNING WNG14 #2
RESET button. WNG24 #2
WNG34 #2
WNG44 #2
WNG74 #2
Press the
None
WNG13 #2
WARNING
WNG33 #2
RESET button.
WNG43 #2
WNG73 #2
Press the Fixed
WNG6100
WARNING
RESET button.
Turn off the
Fixed
WNG6200
power.
Press the Fixed
WNG6300
WARNING
RESET button.
Press the Fixed
WNG5200
WARNING
RESET button.
Lower
the temperature.
Press the Fixed
WNG5300
WARNING
RESET button.
Rotate the fan.
Press the None
WNG3500
WARNING
WNG7500
RESET button.
Press the None
WNG3600
WARNING
WNG7600
RESET button.
WNG5101
)
0 9 : CH 9 1 3 : CH 13
1 0 : CH 10 1 4 : CH 14
1 1 : CH 11 1 5 : CH 15
1 2 : CH 12 1 6 : CH 16
page
output
#1
49, 50
-
-
16
-
-
16
58, 78
58
-
80
-
-
24,
76, 77
24,
76, 77
-
93