Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Philips BDL4675XU
Summary of Contents for Philips BDL4675XU
- Page 1 BDL4675XU www.philips.com/welcome EN User manual Cleaning and troubleshooting...
-
Page 2: Safety And Troubleshooting Information
• When turning off the monitor by detaching the power cord, wait for 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. - Page 3 User Manual BDL4675XU Service: • The casing cover should be opened only by qualified service personnel. • If there is any need for any document for repair or integration, please contact your local service center. • Do not leave your monitor in a car/trunk under direct sun light.
-
Page 4: Regulatory Information
User Manual BDL4675XU REGULATORY INFORMATION CE DECLARATION OF CONFORMITY MMD declares under our responsibility that the product is in conformity with the following standards • EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment) • EN55022:2006+A1:2007 (Radio Disturbance requirement of Information Technology Equipment) •... - Page 5 User Manual BDL4675XU POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer and so on) should have the same power supply source.
- Page 6 User Manual BDL4675XU INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse.
- Page 7 User Manual BDL4675XU 中国电子信息产品污染控制表示要求 ( 中国 RoHS 法规标示要求 ) 产品中有毒有害物质或元素 的名称及含量 有毒有害物质或元素 六价铬 铅 部件名称 汞 镉 多溴联苯 多溴二苯醚 (Hg) (Cd) (PBB) (PBDE) (Pb) (Cr 6 外壳 液晶面板 电路板组件 附件 ( 遥控器，电源线，连接线 ) 遥控器电池 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。...
- Page 8 Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
-
Page 9: Table Of Contents
3.5. EXTERNAL AUDIO CONNECTION 3.5.1. CONNECTING EXTERNAL SPEAKERS 3.5.2. CONNECTING EXTERNAL AUDIO DEVICE 3.6. CONNECTING ANOTHER BDL4675XU MONITOR OSD MENU 4.1. NAVIGATING THE OSD MENU 4.1.1. NAVIGATING THE OSD MENU USING THE REMOTE CONTROL 4.1.2. NAVIGATING THE OSD MENU USING THE MONITOR’S CONTROL BUTTONS 4.2. - Page 10 User Manual BDL4675XU 6.3. BRIGHT DOT DEFECTS 6.4. DARK DOT DEFECTS 6.5. PROXIMITY OF PIXEL DEFECTS 6.6. PIXEL DEFECT TOLERANCES CLEANING AND TROUBLESHOOTING 7.1. CLEANING 7.2. TROUBLESHOOTING TECHNICAL SPECIFICATIONS...
-
Page 11: Unpacking And Installation
User Manual BDL4675XU UNPACKING AND INSTALLATION 1.1. UNPACKING • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • The weight of the product differs - depending on the type. Due to the size and weight it is recommended for two people to move it. -
Page 12: Portrait Mounting
User Manual BDL4675XU 1.4. PORTRAIT MOUNTING Wall mounting holes Notes: Note: The AC IN/OUT socket should be on top of all connectors when rotating your monitor. • Metric 6 (10mm) screws (with a length 10-15mm longer than the thickness of the mounting bracket) are needed for wall mounting (not included). -
Page 13: Parts And Functions
User Manual BDL4675XU PARTS AND FUNCTIONS 2.1. REAR VIEW Dent depth: 1. ENTER/VIDEO SOURCE button • Use this button to select the input source. • When the On Screen Display menu is active, use this as the SET button. 2. MENU button •... - Page 14 User Manual BDL4675XU 8. Carrying handle Use these handles when carrying the monitor by hand. 9. Cable retainer installation holes Install the cable retainer using these holes. 10. Remote control sensor, ambient light sensor and power indicator • Receives command signals from the remote control.
-
Page 15: Input/Output Terminals
Outputs the VGA signal from the VGA IN jack. 17. AC OUT (3.0 A) 8. VGA IN Connect to the AC IN socket of another BDL4675XU Connect to the VGA output of a computer. monitor or an external media device. -
Page 16: Remote Control
User Manual BDL4675XU 2.3. REMOTE CONTROL 2.3.1. GENERAL FUNCTIONS POWER button Press to switch on the monitor from standby mode. Press again to turn it off to standby mode. SMART button To select smart picture mode from: • HIGHBRIGHT: for moving image such as Video •... -
Page 17: Menu Button
User Manual BDL4675XU DISPLAY button To turn on/off the setting information displayed on the upper right corner of the screen. MENU button To turn the OSD menu on/off. UP button • To move the highlight bar up to adjust the selected item when OSD menu is on. -
Page 18: Inserting The Batteries In The Remote Control
User Manual BDL4675XU 2.3.2. INSERTING THE BATTERIES IN THE REMOTE CONTROL 1. Remove the cover on the rear of the remote control. 2. Insert two AAA size 1.5V batteries ensuring that the “+” and “-” ends of the batteries are correctly aligned. -
Page 19: Connections To External Equipment
User Manual BDL4675XU CONNECTIONS TO EXTERNAL EQUIPMENT 3.1. USING THE CABLE RETAINER 3.2. USING THE SWITCH COVER You can use the switch cover to prevent the monitor from being turned on or off accidentally. 3.3. CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/VCD) 3.3.1. -
Page 20: Using S-Video Input
User Manual BDL4675XU 3.3.2. USING S-VIDEO INPUT 1. Connect the S-Video connector of the external device to the S-VIDEO input of the monitor. 2. Connect the red (R) and white (L) audio jacks of the device to the AUDIO IN (AUDIO2 or AUDIO3) jacks of the monitor. -
Page 21: Using Hdmi Input
User Manual BDL4675XU 3.3.4. USING HDMI INPUT Connect the HDMI connector of the external device to the HDMI input of the monitor. DVD/VCR/VCD 3.4. CONNECTING A PC 3.4.1. USING VGA INPUT 1. Connect the 15-pin VGA connector of the PC to the VGA IN connector of the monitor. -
Page 22: Using Dvi Input
User Manual BDL4675XU 3.4.2. USING DVI INPUT 1. Connect the DVI-D connector of the PC to the DVI-D connector of the monitor. 2. Connect the audio cable to the AUDIO IN (AUDIO1) input of the monitor. 3.4.3. USING HDMI INPUT 1. -
Page 23: External Audio Connection
User Manual BDL4675XU 3.5. EXTERNAL AUDIO CONNECTION 3.5.1. CONNECTING EXTERNAL SPEAKERS 1. Connect the speaker wires to the external speaker (SPEAKERS) output of the monitor. 2. Turn on the monitor. Note: Make sure your monitor is turned off before connecting the speaker wires. -
Page 24: Connecting Another Bdl4675Xu Monitor
Note: The number of displays that can be used in a daisy-chain configuration will depend on the resolution of the input signal being used. • Connect the VGA OUT connector of the monitor to the VGA IN connector of additional BDL4675XU monitor. • Connect the RS232C OUT connector of the monitor to the RS232C IN connector of additional BDL4675XU monitor. -
Page 25: Osd Menu
User Manual BDL4675XU OSD MENU An overall view of the On-Screen Display (OSD) structure is shown below. This can be used as a reference for further adjusting your monitor. 4.1. NAVIGATING THE OSD MENU 4.1.1. NAVIGATING THE OSD MENU USING THE REMOTE CONTROL 1. -
Page 26: Navigating The Osd Menu Using The Monitor's Control Buttons
User Manual BDL4675XU 4.1.2. NAVIGATING THE OSD MENU USING THE MONITOR’S CONTROL BUTTONS 1. Press the MENU button to display the OSD menu. 2. Press the / button to choose the item you want to adjust. 3. Press the ENTER/VIDEO SOURCE button to enter the submenu. -
Page 27: Osd Menu Overview
User Manual BDL4675XU 4.2. OSD MENU OVERVIEW 4.2.1. PICTURE MENU P IC T UR E BR IGH T NE S S 10 0 CON TRA ST S HA RP NE S S BL ACK L E V E L NOI S E RE DU CTI O N... - Page 28 User Manual BDL4675XU COLOUR CONTROL Note: This function is only available when COLOUR TEMPERATURE is set to USER. With this function you can adjust the colour tones of the image precisely by changing the R (Red), G (Green) and B (Blue) settings independently.
-
Page 29: Screen Menu
User Manual BDL4675XU 4.2.2. SCREEN MENU S CR EE N H P O SI TI ON V P O S IT I O N CL OCK CL OCK P HAS E ZOOM M O DE F ULL CU S TOM ZOO M... - Page 30 User Manual BDL4675XU • REAL - This mode displays the image pixel-by-pixel on screen without scaling the original image size. • 21:9 - The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format).
-
Page 31: Audio Menu
User Manual BDL4675XU 4.2.3. AUDIO MENU AU DI O V O L UM E M UT E O F F AU DI O S O UR CE S P EA KE R IN TE RNA L AU DI O RE S E T... -
Page 32: Pip Menu
User Manual BDL4675XU 4.2.4. PIP MENU Note: For COMPONENT, VGA, DVI-D and HDMI inputs only. P IP P IP SI Z E S MA L L P IP AUD IO M AI N P IP RE SE T Se l... -
Page 33: Configuration 1 Menu
User Manual BDL4675XU 4.2.5. CONFIGURATION 1 MENU CO N F IG U RAT IO N 1 AU TO AD JU ST P O W ER S AV E LA NGUA GE E NG LIS H PANE L S AV ING... - Page 34 User Manual BDL4675XU CONFIGURATION RESET Reset all settings in the CONFIGURATION 1 menu. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make selection. Select YES and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and return to the previous menu.
-
Page 35: Configuration 2 Menu
User Manual BDL4675XU 4.2.6. CONFIGURATION 2 MENU CO N F IG U RAT IO N 2 O S D T U R N O F F O S D MO D E LA NDS C AP E IN FORM AT I O N OS D... -
Page 36: Advanced Option Menu
User Manual BDL4675XU 4.2.7. ADVANCED OPTION MENU AD VA NC ED OP TI ON I N PU T R E SO L U TI ON AUTO BLACK LEVEL EXPANSION O F F G AM M A S E L E CT IO N 2. - Page 37 • OFF - Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and VCR signals. IR CONTROL Select the operation mode of the remote control when multiple BDL4675XU monitors are connected via an RS232C connection. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between •...
- Page 38 User Manual BDL4675XU • H MONITORS - Select the number of monitors on the horizontal side. • V MONITORS - Select the number of monitors on the vertical side. • POSITION - Select the position of this monitor in the screen matrix.
- Page 39 • If there are two schedule items programmed for the same time, then the highest numbered schedule has priority. MONITOR ID Set the ID number for controlling the monitor via the RS232C connection. Each monitor must have a unique ID number when multiple BDL4675XU monitors are connected. Use the PLUS/MINUS button to select a monitor ID. DDC/CI Choose to turn ON or OFF the DDC/CI communication function.
-
Page 40: Input Mode
User Manual BDL4675XU INPUT MODE VGA Resolution Active Resolution Standard Refresh Rate Pixel Rate Aspect Ratio Stand for Mode Resolution H Pixels V Lines 60 Hz 25.175 MHz 72 Hz 31.5 MHz Video Graphic Array 75 Hz 31.5 MHz Wide Video Graphic... - Page 41 User Manual BDL4675XU • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected).
-
Page 42: Pixel Defect Policy
This notice explains the different types of pixel defects and defines the acceptable defect level for the BDL4675XU LCD screen. In order to qualify for repair under warranty, the number of pixel defects must exceed a certain level which is given in the reference table. -
Page 43: Bright Dot Defects
6.6. PIXEL DEFECT TOLERANCES In order to qualify for repair due to pixel defects during the warranty period, a PDP/TFT panel in a Philips Plasma/LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table. -
Page 44: Cleaning And Troubleshooting
User Manual BDL4675XU CLEANING AND TROUBLESHOOTING 7.1. CLEANING Cautions When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. Top of display is usually very hot due to the high temperature of air being released through the ventilation holes. -
Page 45: Troubleshooting
User Manual BDL4675XU 7.2. TROUBLESHOOTING Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of 2. Make sure the power switch is switched on. -
Page 46: Technical Specifications
User Manual BDL4675XU TECHNICAL SPECIFICATIONS Display Item Specifications Screen Size (Active Area) 46” LCD Aspect ratio 16:9 Number of pixels 1366 (H) x 768 (V) Pixel pitch 0.7455 (H) x 0.7455 (V) [mm] Displayable colours 16.7M colours Brightness (typical) 450 cd/m... - Page 47 User Manual BDL4675XU Dimensions [W x H x D mm] With Stand 1026 x 581 x 133 mm Without Stand 1026 x 666 x 316 mm Weight With Stand 30 Kg Without Stand 27.5 Kg Environmental Conditions Item Specifications Operational...