Philips BDL4681XU/00 User Manual
Philips lcd monitor bdl4681xu 117 cm (46") multimedia hd ready
Hide thumbs
Also See for BDL4681XU/00:
- Service manual (129 pages) ,
- Specification sheet (3 pages) ,
- Brochure & specs (3 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Philips BDL4681XU/00
Summary of Contents for Philips BDL4681XU/00
- Page 1 BDL4681XU www.philips.com/welcome EN User manual Cleaning and troubleshooting...
- Page 2 • If turning off the monitor by detaching the power cord, wait for 6 seconds before attaching the power cord for normal operation. • Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center.
- Page 3 Service: • The casing cover should be opened only by qualified service personnel. • If there is any need for any document for repair or integration, please contact with your local service center. • Do not leave your monitor in a car/trunk under direct sun light. Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed.
-
Page 4: Regulatory Information
EQUIPMENT REGULATIONS. FCC DECLARATION OF CONFORMITY Trade Name: Philips Declaration of Conformity for Products Marked with FCC Logo, United States Only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 5 POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
- Page 6 INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2.
- Page 7 User Manual BDL4681XU RoHS (Hg) (Pb) (Cd) (PBB) (Cr 6 SJ/T11363-2006 SJ/T11363-2006 (PBDE)
- Page 8 Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
-
Page 9: Table Of Contents
TABLE OF CONTENTS UNPACKING AND INSTALLATION 1.1. UNPACKING 1.2. PACKAGE CONTENTS 1.3. INSTALLATION NOTES 1.4. PORTRAIT MOUNTING PARTS AND FUNCTIONS 2.1. REAR VIEW 2.2. INPUT/OUTPUT TERMINALS 2.3. REMOTE CONTROL 2.3.1. GENERAL FUNCTIONS 2.3.2. INSERTING THE BATTERIES IN THE REMOTE CONTROL 2.3.3. - Page 10 6.3. BRIGHT DOT DEFECTS 6.4. DARK DOT DEFECTS 6.5. PROXIMITY OF PIXEL DEFECTS 6.6. PIXEL DEFECT TOLERANCES CLEANING AND TROUBLESHOOTING 7.1. CLEANING 7.2. TROUBLESHOOTING TECHNICAL SPECIFICATIONS...
-
Page 11: Unpacking And Installation
RETURN TO THE CONTENTS 1. LCD monitor 2. Remote control with batteries 3. CD-ROM (EDFU and SICP) 4. Quick Start Guide 5. PHILIPS logo 6. BNC-to-RCA adapter (x 2) 7. RCA-to-BNC adapter (x 3) 8. Cable retainer (x 2) 9. Power cords 10. -
Page 12: Portrait Mounting
User Manual BDL4681XU 1.4. PORTRAIT MOUNTING Wall mounting holes Notes: • Metric 6 (10mm) screws (having a length 10-15mm longer than the thickness of the mounting bracket) are needed for wall mounting (not included). Tighten the screws securely (recommended torque: 470 - 635N•cm) •... -
Page 13: Parts And Functions
User Manual BDL4681XU PARTS AND FUNCTIONS 2.1. REAR VIEW 1. ENTER/VIDEO SOURCE button • Use this button to select the input source. • When the On Screen Display menu is active, use this as the SET button. 2. MENU button •... - Page 14 User Manual BDL4681XU 8. Carrying handle Use these handles when carrying the monitor by hand. 9. Cable retainer installation holes Install the cable retainer using these holes. 10. Remote control sensor, ambient light sensor and power indicator • Receives command signals from the remote control. •...
-
Page 15: Input/Output Terminals
User Manual BDL4681XU 2.2. INPUT/OUTPUT TERMINALS 1. AC IN (5.5 A) Connect the supplied power cord to the wall outlet. 2. Main power switch Press to switch the main power on/off. 3. AUDIO IN (AUDIO1) Connect to the audio output of a computer. 4. -
Page 16: Remote Control
User Manual BDL4681XU 2.3. REMOTE CONTROL 2.3.1. GENERAL FUNCTIONS POWER button Press to switch on the monitor from standby mode. Press again to turn it off to standby mode. SMART button To select smart picture mode from: • HIGHBRIGHT: for moving image such as Video •... - Page 17 User Manual BDL4681XU DISPLAY button To turn on/off the setting information displayed on the upper right corner of the screen. MENU button To turn the OSD menu on/off. UP button • To move the highlight bar up to adjust the selected item when OSD menu is on. •...
-
Page 18: Inserting The Batteries In The Remote Control
User Manual BDL4681XU 2.3.2. INSERTING THE BATTERIES IN THE REMOTE CONTROL 1. Remove the cover on the rear of the remote control. 2. Insert two AAA size 1.5V batteries ensuring that the “+” and “-” ends of the batteries are correctly aligned. 3. -
Page 19: Connections To External Equipment
User Manual BDL4681XU CONNECTIONS TO EXTERNAL EQUIPMENT 3.1. USING THE CABLE RETAINER 3.2. USING THE SWITCH COVER You can use the switch cover to prevent the monitor from being turned on or off accidentally. 3.3. CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/VCD) 3.3.1. USING COMPONENT VIDEO INPUT 1. -
Page 20: Using S-Video Input
User Manual BDL4681XU 3.3.2. USING S-VIDEO INPUT 1. Connect the S-Video connector of the external device to the S-VIDEO input of the monitor. 2. Connect the red (R) and white (L) audio jacks of the device to the AUDIO IN (AUDIO2 or AUDIO3) jacks of the monitor. -
Page 21: Using Hdmi Input
User Manual BDL4681XU 3.3.4. USING HDMI INPUT Connect the HDMI connector of the external device to the HDMI input of the monitor. 3.4. CONNECTING A PC 3.4.1. USING VGA INPUT 1. Connect the 15-pin VGA connector of the PC to the VGA IN connector of the monitor. 2. -
Page 22: Using Dvi Input
User Manual BDL4681XU 3.4.2. USING DVI INPUT 1. Connect the DVI-D connector of the PC to the DVI-D connector of the monitor. 2. Connect the audio cable to the AUDIO IN (AUDIO1) input of the monitor. 3.4.3. USING HDMI INPUT 1. -
Page 23: External Audio Connection
User Manual BDL4681XU 3.5. EXTERNAL AUDIO CONNECTION 3.5.1. CONNECTING EXTERNAL SPEAKERS 1. Connect the speaker wires to the external speaker (SPEAKERS) output of the monitor. 2. Turn on the monitor. Note: Before connecting the speaker wires to the monitor, turn off your monitor. 3.5.2. -
Page 24: Connecting Another Bdl4681Xu Monitor
User Manual BDL4681XU 3.6. CONNECTING ANOTHER BDL4681XU MONITOR You can interconnect multiple BDL4681XU monitors to create a daisy-chain configuration for applications like a video wall. Note: The number of displays that can be used in a daisy-chain configuration will depend on the resolution of the input signal being used. -
Page 25: Osd Menu
User Manual BDL4681XU OSD MENU An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your monitor. 4.1. NAVIGATING THE OSD MENU 4.1.1. NAVIGATING THE OSD MENU USING THE REMOTE CONTROL 1. -
Page 26: Navigating The Osd Menu Using The Monitor's Control Buttons
User Manual BDL4681XU 4.1.2. NAVIGATING THE OSD MENU USING THE MONITOR’S CONTROL BUTTONS 1. Press the MENU button to display the OSD menu. 2. Press the / button to choose the item you want to adjust. 3. Press the ENTER/VIDEO SOURCE button to enter the submenu. -
Page 27: Osd Menu Overview
User Manual BDL4681XU 4.2. OSD MENU OVERVIEW 4.2.1. PICTURE MENU P IC T UR E BR IGH TNE S S CON T RA ST S HA RP NE S S BL ACK L E V E L NOI S E RE DU CTI O N TI NT COL O R COL O R T EM P E RAT U RE... - Page 28 User Manual BDL4681XU COLOR CONTROL Note: This function is only available when COLOR TEMPERATURE is set to USER. With this function you can adjust the color tones of the image precisely by changing the R (Red), G (Green) and B (Blue) settings independently. Press the SET/PLUS button to open the submenu.
-
Page 29: Screen Menu
User Manual BDL4681XU 4.2.2. SCREEN MENU S CR EE N H P O SI T I O N V P O S IT I O N CL OCK CL OCK P HAS E ZOOM M O DE C U STOM Z OO M S CR EE N RE S E T Se l A djus t... - Page 30 User Manual BDL4681XU • REAL - This mode displays the image pixel-by-pixel on screen without scaling the original image size. • 21:9 - The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). CUSTOM ZOOM Note: This item is only available when the ZOOM MODE setting is set to CUSTOM.
-
Page 31: Audio Menu
User Manual BDL4681XU 4.2.3. AUDIO MENU AU DI O V O L UM E M UT E AU DI O S O UR CE S P EA KE R AU DI O RE S E T Se l A djus t E nter VOLUME Adjust to increase or decrease the audio output level. -
Page 32: Pip Menu
User Manual BDL4681XU 4.2.4. PIP MENU Note: For COMPONENT, VGA, DVI-D and HDMI inputs only. P IP P IP SI Z E P IP AUD IO P IP RE SE T Se l A djus t E nter PIP SIZE Select the size of the sub picture in the PIP (Picture-in-Picture) mode. -
Page 33: Configuration 1 Menu
User Manual BDL4681XU 4.2.5. CONFIGURATION 1 MENU CO N F IG U RAT IO N 1 AU TO AD JU ST P O W ER S AV E LA NGUA GE PANE L S AV ING CO L O R S Y S T E M CO N F IG U RAT IO N RE S E T FACTO RY RE S ET Se l... - Page 34 User Manual BDL4681XU CONFIGURATION RESET Reset all settings in the CONFIGURATION 1 menu. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make selection. Select YES and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and then return to the previous menu.
-
Page 35: Configuration 2 Menu
User Manual BDL4681XU 4.2.6. CONFIGURATION 2 MENU CO N F IG U RAT IO N 2 OSD TUR N OF F O SD MO D E IN FORM ATI ON OS D S L E E P T IM E R O S D H PO S I T I O N O S D V P O S IT I O N M O NITO R IN FORM ATI ON... -
Page 36: Advanced Option Menu
User Manual BDL4681XU 4.2.7. ADVANCED OPTION MENU AD VA NC ED OPTI ON I N P U T R E S O L U T I O N BLACK LEVEL EXPANSION G AM M A S E L E CT IO N S CA N M O DE S CA N C O NV E RS IO N P RO G R ES S IV E... - Page 37 User Manual BDL4681XU FILM MODE Note: For VIDEO, S-VIDEO, COMPONENT, and HDMI (video mode) inputs only. Choose to turn on or off the film mode frame conversion function. Use the PLUS/MINUS button to toggle between • AUTO - Enable the film mode frame conversion function for movies and motion pictures. The monitor converts a 24 frames-per-second (24 fps) input signal format to DVD video signal format.
- Page 38 User Manual BDL4681XU • H MONITORS - Select the number of monitors on the horizontal side. • V MONITORS - Select the number of monitors on the vertical side. • POSITION - Select the position of this monitor in the screen matrix. •...
- Page 39 User Manual BDL4681XU 4. Press the EXIT button, and then press the PLUS button to highlight the OFF item. Press the SET button, and then press the UP/DOWN button to set the hour when the monitor will be turned off, then press the PLUS button to move to the minute slot to set the minute.
-
Page 40: Input Mode
User Manual BDL4681XU INPUT MODE VGA Resolution Active Resolution Standard Resolution H Pixels WVGA SVGA 1024 WXGA 1280 WXGA 1280 SXGA 1280 SXGA 1280 WXGA 1360 WXGA 1366 UXGA 1600 HD1080 1920 SDTV Resolution Active Resolution Standard Resolution H Pixels 480i 480p 576i... - Page 41 User Manual BDL4681XU • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected).
-
Page 42: Pixel Defect Policy
Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions. -
Page 43: Bright Dot Defects
PIXEL DEFECT TOLERANCES In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table. -
Page 44: Cleaning And Troubleshooting
User Manual BDL4681XU CLEANING AND TROUBLESHOOTING 7.1. CLEANING Cautions When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. Top of display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. -
Page 45: Troubleshooting
User Manual BDL4681XU 7.2. TROUBLESHOOTING Symptom No picture is displayed 1. The power cord is disconnected. 2. The main power switch on the back of 3. The selected input has no connection. 4. The monitor is in standby mode in VGA Interference displayed on Caused by surrounding electrical the monitor or audible... -
Page 46: Technical Specifications
User Manual BDL4681XU TECHNICAL SPECIFICATIONS Display Item Screen Size (Active Area) Aspect ratio Number of pixels Pixel pitch Displayable colors Brightness (typical) Dynamic contrast ratio Contrast ratio (typical) Viewing angle In/Out Terminals Item Speaker Output Internal Speaker Audio Output RCA Jack x 1 Audio Input RCA Jack x 2 RS232C... - Page 47 User Manual BDL4681XU Dimension [W x H x D mm] With Stand Without Stand Weight With Stand Without Stand Environmental Condition Item Operational Temperature Storage Operational Humidity Storage Operational Pressure Storage / Shipment Internal Speaker Item Type Input Impedance Output Sound Pressure Frequency Response 1026 x 581 x 133 mm 1026 x 666 x 316 mm...