Silvercrest CRE-521 Instructions Manual page 35

"ADJ": Setting the time
To set or change the time settings, press the control dial
Press the control dial until you get to the menu item "ADJ". There you have the option of setting the time of the device by
turning the dial. Turning to the right changes the number of the hours, turning to the left, the minutes.
The setting is saved either when the desired value is confirmed by pressing the control dial
(don't change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
Note:
If the device receives an RDS station with an RDS time signal, the clock will be automatically updated in particular intervals.
"TAVOL": Volume for traffic announcements
The "TAVOL" function enables an adjustment of the playback volume when the device is turned on according to individual
preferences.
To change the device's volume for traffic announcements, press the control dial
function will appear. Press the control dial
device's volume for traffic announcements by turning the dial. Turning to the right increases the volume for traffic
announcements, turning to the left reduces the volume for traffic announcements. The volume for traffic announcements can be
set for between 0-45. Here 0 = no sound and 45 = maximum volume of the device.
The setting is saved either when the desired value is confirmed by pressing the control dial
(don't change anything on the device for approx. five seconds). If you confirm the selection by pressing the control dial
will reach the next possible setting. If you use the automatic storage, the device will return to the standard display.
Note:
During a traffic announcement, it's possible to adjust the volume to the current requirements at any time through the control
dial .
"EON": Automatic station switching for traffic announcements
The "EON" function is an additional RDS service. If the current program doesn't offer any traffic announcements, EON
automatically switches to the traffic announcements on another program. After the end of the announcement, the device
switches back to the previously heard station. The readiness for traffic announcements "TA" has to be activated for this.
until you get to menu level 2. The "INVOL" function will appear.
until you get to the menu item "TAVOL". There you have the option of setting the
or through automatic storage
until menu level 2 is reached. The "INVOL"
or through automatic storage
English
, you
you
35