Muting The Speakers; Selection Of The Radio Station; Select The Wavelength Range - Silvercrest CRE-521 Instructions Manual

12.3 Muting the speakers

To mute the connected speakers, briefly press the "MUTE" button
original volume, briefly press the "MUTE" button
the volume will be at the same level as before it was muted.
Note:
The MUTE setting also affects the LINE outputs. The MUTE function interrupts the playback of the audio tracks until the
function is turned off.
13 Radio (Tuner) Mode

13.1 Selection of the radio station

Turn on the SilverCrest CRE-521 MP3/WMA/OGG car radio with the "PWR" button
RADIO mode, the last selected station will be heard. If the device is set to an operation with one of the different data storage
media, please press the "MODE" button

13.2 Select the wavelength range

FM (UKW) range: To select the FM range, briefly press the "BAND" button
or "FM 3" and the current frequency appear on the display.
MW range: To select the MW range, briefly press the "BAND" button
and the current frequency.
Note:
After selecting a range, the station last selected in this range will be heard.
20
. "MUTE" will appear in the display. In order to return to the
again or turn the volume control dial. The message "MUTE" will turn off and
until you get to the radio function.
. If the device was turned off while it was in
repeatedly until the desired range "FM 1", "FM 2"
repeatedly until the display indicates "MW 1" or "MW 2"