Table of Contents
Advertisement
Problems when establishing a connection
Error
You cannot phone or send faxes.
CHECK
DISPLAY
Error report
or
or
fax transmissions are constantly
interrupted.
Possible cause
Wrong dialling mode selected.
You are operating your fax machine on a
private branch exchange and have not
set it accordingly.
The telephone connection is of poor
quality.
The recipient has a paper jam or has run
out of paper.
Your fax partner's line is busy, does not
answer or a different device answers.
Your fax machine is not properly installed
or not properly plugged in.
You are connected to a PABX system.
Your fax correspondent has a fax
machine that cannot receive the usual
standard identifying signals.
– 34 –
Remedy
Change the dialling mode with function
15.
In function 15, select PABX: Yes.
Try again or send the fax at reduced
speed (function 21).
Call your fax partner.
Try later or draw your fax partners
attention to a possible installation fault.
Check the installation of your fax
machine.
Check the settings in function 15.
Try to send the fax manually: press the
DIAL key and dial the fax number. You
will hear the call being established. If the
receiver is using an automatic answering
machine, wait until you hear a tone after
the prerecorded message and then press
the START key.
Advertisement
Table of Contents
