Options Adjustments - Panasonic TH-42PH20E Operating Instructions Manual

Options Adjustments

1
2
3
4
5
Item
Weekly Command
Sets Weekly Command Timer. (see page 46)
Timer
Audio input select Set up the sound when an image input is selected. (see page 48)
On: Displays all the following on screen.
• Power on display
• Input signal switch display
Onscreen display
• No signal display
• Mute and the remaining time of off-timer after
Off: Hides all the items above from view.
Adjusts the input signal when the unit is turned on.
Off
*1 "SLOT INPUT" is displayed when an optional Terminal Board is installed.
Initial input
*2 "COMPONENT" may be displayed as "RGB" depending on the setting of "Component/RGB-in select".
Notes:
• Only the adjusted signal is displayed. (see page 15)
• This menu is available only when "Input lock" is "Off".
Press
Off
Off: Sets normal volume.
Initial VOL level On: Sets your preferred volume.
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
Press
Off
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Maximum VOL level
Notes:
• If the "Maximum VOL level" is set lower than the "Initial VOL level", the "Initial VOL level" automatically
becomes the same as the "Maximum VOL level".
• The volume display can go up to 63 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when "Maximum VOL level" is "On" and cursor is on the menu.
Press to display the Setup menu.
Press to select "OSD Language".
Press for more than 3 seconds.
Press to select "Options".
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
PC SLOT INPUT*
When a Terminal Board with dual input terminals is installed, "SLOT INPUT A" and "SLOT INPUT
B" are displayed.
(see page 38)
button to adjust the volume when the unit is turned on.
On
button to adjust the maximum volume.
On
Options
Shipping
Adjustments
was pressed.
VIDEO COMPONENT*
1
Options
Weekly Command Timer
Audio input select
Onscreen display
Initial input
Initial VOL level
Maximum VOL level
Input lock
Button lock
Remocon User level
Options
Off-timer function
Initial Power Mode
ID select
Remote ID
Serial ID
Display size
Studio W/B
Studio Gain
Options
Slot power
Power On Screen Delay
Clock Display
All Aspect
Auto Setup
Rotate
HDMI DVI
2
1/3
On
Off
Off 0
Off 0
Off
Off
Off
2/3
Enable
Normal
0
Off
Off
Off
Off
Off
3/3
O f f
Off
Off
Off
Manual
Off
43