Time/Charge; Charges; Charge Setup - Siemens C35 User Manual

48
You can display the charge details
and duration of calls as you speak,
as well as setting a unit limit for out-
going calls.
Î
then select a function:
###########
###########

Charges

Charges
Charges Charges
When you have adjusted the set-
tings (see below) you can display
the details of the following calls:
###########
###########
A
Scroll and select the re-
quired call.
Display the data.
After the data has been displayed,
you can:
Clear the display.
If a restriction exists
(see right), then the
remaining credit or time
is displayed.

Charge Setup

Charge Setup Charge Setup Charge Setup
Currency Currency Currency Currency
Enter the currency in which charge
details are to be shown.

Time/Charge

Time/Charge
Time/Charge Time/Charge
,
D
AdviceOf Charge AdviceOf Charge AdviceOf Charge AdviceOf Charge
If your network supports charge
detail display, then the current units
are shown.
If you have set the charge per unit,
then the costs incurred are
displayed.
It may be necessary to register
separately for this service.
Personal Rate Personal Rate
Personal Rate Personal Rate
Enter the charges per unit/period.
Charge Limit Charge Limit
Charge Limit Charge Limit
Special SIM cards allow you or the
service provider to define a credit/
period after which the phone is
blocked for outgoing calls (PIN2
required).
Press.
-
Enter the number of units.
/
Then confirm the credit or reset the
counter.
Combined In/Out Combined In/Out Combined In/Out Combined In/Out
Display the call time/charge details
for all calls.
Charge Incoming Charge Incoming
Charge Incoming Charge Incoming
Display the charge details for incom-
ing calls if this is billed separately.
Auto Display Auto Display Auto Display Auto Display
The length of call and charge details
are displayed after every call.
D
D