Fax/Data Mode - Siemens C35 User Manual

FAX/Data Mode

FAX/Data Mode
FAX/Data Mode FAX/Data Mode
Î Î
then select a function:
You can use the phone and a con-
nected PC to send and receive faxes
and data (see also page 59).
Prerequisites: Prerequisites:
Prerequisites: Prerequisites:
The use of fax and data services
must be enabled.
Depending on the network, there
are several types of fax/data recep-
tion, so you should check with your
service provider.
Self Test Self Test
Self Test Self Test
PC connection is checked.
Send Sp/FAX Send Sp/FAX Send Sp/FAX Send Sp/FAX
If this function is activated, the fol-
lowing soft key is available for 2 sec-
onds:
3L $;>
Press. You can now
switch from speech to fax
mode during a call in order
to send a fax.
Otherwise, the call is treated as a
normal call.
Setup Setup
Setup Setup
E
Receive Sp/FAX Receive Sp/FAX Receive Sp/FAX Receive Sp/FAX
(Only if the phone numbers for
speech and fax reception are
identical).
Switch to fax mode during a call.
Receive FAX/Data Receive FAX/Data Receive FAX/Data Receive FAX/Data
(Only if the phone numbers for
speech and fax reception are
identical).
When this function is switched on
and the connection to the PC is
active, only fax or data calls can be
received. The PC automatically
accepts the fax or data call,
depending on which communication
program is active.
When this function is switched on
voice calls can only be accepted if
the connection to the PC has previ-
ously been interrupted.
57
.