Permanent Copy Settings - Sharp AM-300 Online Manual

Permanent Copy Settings

Permanent Copy Settings
The following copy settings remain in effect until they are changed. These
settings do not revert to the default settings when the auto clear time elapses
or when
Default copy quality setting
The default quality setting (page 59) is "TEXT" (this is the setting that is used
if you do not make a selection). If desired, you can change the default quality
setting to "PHOTO".
1
MENU
Press
until the display at right appears.
2
Press
3
Select the default quality setting:
TEXT:
4
Press
62
is pressed.
Z
and then or
.
PHOTO:
repeatedly to exit.
A
Display:
COPY SETTING
1: TEXT
The display briefly shows
your selection, then:
2: COPY RESO.