Sending Faxes (Am-400 Only); Sending A Fax - Sharp AM-300 Online Manual

3. Sending Faxes (AM-400 only)

Sending a Fax

Follow the steps below to send a fax. To dial the fax number of the receiving
machine, you can either directly enter the number with the number keys
(Direct Keypad Dialling), or press
number (Speed Dialling).
♦
To use a Speed Dial number, you must first store the number in the
machine as explained on page 75.
♦
You can perform the following procedure even when the machine is already
busy sending or receiving a fax. In this case, the fax transmission will be
stored in the machine's memory and performed once all previously stored
jobs have been completed.
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press
70
).
SPEED
and enter a two-digit Speed Dial
Display:
∗∗ FAX ∗∗
10/03 11:37 FAX
Reception
Date and
time mode
(page 98)