Sleep Operation; Snooze/Dimmer Operation; Aux Out Operation - Sanyo DMP-P7 Instruction Manual

1. When the clock radio is off or while listening to your iPod or the radio, press the SLEEP Button to enter
sleep mode. The unit will automatically turn off after the selected time. Sleep mode has a Gentle Sleep
feature which gradually lowers the volume.
2. You can adjust the sleep timer from 120, 90, 60, 30, 15 minutes by pressing the SLEEP Button again.
Pressing the SLEEP Button while sleep is set to 30 minutes will turn off the unit.
3. When the display changes back to show the real time, pressing the SLEEP Button once will show the sleep
time remaining. Pressing it again will change sleep time to the next lowest increment.
4. Clock radio has independent volume setting for sleep for sleep mode so you can adjust the sleeping volume
without affecting the alarm volume. Press the VOLUME UP or DOWN (or press Volume+ and Volume-
Button on the remote control) to adjust sleep volume. The sleep volume will remain at that level the next
time the you enter sleep mode until controls are changed.
5. To stop listening at any time, press the POWER Button (or POWER ON/OFF Button on the remote control).
1. Press the SNOOZE/DIMMER Button on the clock radio after the alarm sounds. The alarm will go off and will
come on again in approx. 9 minutes. You may repeat this cycle several times during the 1 hour alarm cycle.
2. During normal operation, press the SNOOZE/DIMMER Button to control the brightness of the LCD display.
You can connect the clock radio to another line-level device such as an amplifier or recording device through the
AUX OUT Jack located at the back of the unit. The volume setting on the clock radio does not affect the line
level. Adjust volume level using the volume control on the device you connect to.

Sleep Operation

Snooze/Dimmer Operation

AUX Out Operation

12