Sanyo DMP-P8 Instruction Manual page 12

Operating Instructions
C. Snooze Function
After alarm is ON, you can press SNOOZE and ALARM1 / ALARM2
buttons on the top panel or remote control to temporarily deactivate
the alarm which will activate again after 9 minutes lapse. To switch it
off, you can press ALARM1 / ALARM2 button.
D. Sleep Function
When unit is power on, Press
SLEEP button on the top panel
or remote control, 2:00 and sleep
indication will ON. Press SLEEP
button again to change and select
from 2:00 to 1:30, 1:00, 0:30, 0:20,
0:10 or 0:05. Select "oFF" means no sleep function. While the sleep
function is activated, press SLEEP button once and the remained
sleep time will be shown. Press SLEEP button again to select another
sleep times.
ІІІ) Listening to Your iPod And Radio/ iPod Charging
IMPORTANT!
In order to prevent unwanted distortion during iPod playback, it is
recommended that you set the EQ in your iPod to the "Off" position.
Go to the Main Menu in your iPod and then select the Settings Menu,
select the EQ Setting, and make sure that the EQ function is set to
"Off" . ( Main Menu > Settings Menu > EQ Setting > Select "Off" )
Note : We have also included one flat
adaptor with no opening at all.
This serves as a dust cover that can
be inserted in the docking station if
no iPod will be connected to this unit
for an extended period of time. Remove
this dust cover before use.
- 11 -