Indicators And Projector Condition - Sanyo PLC-XE50A Owner's Manual

Indicators and Projector Condition

Check the indicators for projector condition.
The projector is operating normally.
Indicators
WARNING WARNING
POWER
TEMP . FILTER
red/green
orange
red
✽
red
✽
red
✽
green
✽
green
• • •on
LAMP
REPLACE
yellow
The projector is off. (The AC power cord is unplugged.)
The projector is preparing for stand-by or the projection lamp is
✽
being cooled down. The projector cannot be turned on until cooling is
completed.
✽
The projector is ready to be turned on with the ON/STAND-BY button.
✽
The projector is operating normally.
✽
The projector is in the Power management mode.
• • • off
• • • blinking.
Projector Condition
• • • Differs according to conditions.
✽
Appendix
63