Vacuum Cleaner MC-UL674 Model No. We would advise that you carefully study these Operating Instructions before attempting to operate the vacuum cleaner and that you note the Important Safety Instructions.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
This symbol is only valid in the European Union. • This appliance should be serviced by an authorised Panasonic Service Centre, and only genuine Panasonic spare parts If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of should be used.
• Most major credit and debit cards accepted. • All enquiries transactions and distribution facilities are provid- ed directly by Panasonic UK Ltd. Depress handle height adjust button to allow handle to be • It couldn’t be simpler! Line up telescopic handle with handle opening on top of vacuum cleaner, and insert handle.
SPECIFICATIONS B) HOW TO ATTACH THE HOSE MODEL NO. MC-UL674 POWER SOURCE 230-240V / 50Hz MAX. INPUT POWER 2200w MOTOR PROTECTION Hose connector DUST BIN CAPACITY 1.8 litres Hose Inlet EXHAUST FILTER HEPA Hose Coupling DIMENSIONS (W x L x H)
F) HANDLE LOCK / RELEASE BY FOOT PEDAL MAINS LEAD CAUTION: To prevent dam- IMPORTANT: If the mains lead becomes damaged, it must be repaired by Panasonic, authorised service centre or a aging carpeted floors, tiled qualified person in order to avoid any hazard.
H) BLOCKAGES G) HOW TO USE THE ACCESSORIES The hose located on the vacuum cleaner carries the dirt from the nozzle up to the dust bin. If the hose should Secondary Filter Screen become clogged: Unplug the vacuum cleaner from mains outlet. Remove hose coupling and check hose coupling and hose Suction Inlet inlet for clogs according to the following procedure.
MAINTENANCE AND SERVICING TO REPLACE BELT Always follow all safety precautions when cleaning and servicing the vacuum cleaner. Seat right end of agitator into nozzle base. To seat agitator end, place rounded portion of agitator end cap down into slot WARNING: Electrical Shock And Personal Injury Hazard Motor in nozzle base.
G) BELT CHANGING AND CLEANING C) DUST BIN CLEANING AND REMOVAL Always empty the dust bin when dirt level reaches the “MAX FILL” line. WARNING: Electrical Shock And Personal Injury Hazard CAUTION: Electrical Shock And Personal Injury Hazard Disconnect from electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.
TO ASSEMBLE THE DUST BIN D) DUST BIN FILTER CHANGING AND CLEANING Locking Tabs Check primary filter frequently and clean when dirty. Remove the dust bin assembly as outlined in the DUST BIN CLEANING section and empty contents of dust bin. Rotate upper dust bin clockwise from the locked position to Separate the upper dust bin from the lower dust bin by lifting Align the filter with the locking tabs in the dust bin and push...