Using The Remote Controls - Sony KV-36FV300 Operating Instructions Manual

Using the Remote Controls
Model RM-Y181
For KV-27FV300 model
[_,_
[_,_
[_,o
[_,_
[_,o
[_,_
[_,_
[_,_
_k. )7
_MU_NQ POWER
VCR/DVD SATiC_ _
OFF VCR/DVD 8AT/CABLE _/
"WNCR FREEZE SWAP PIP
- (_ Fosm_l(_
®®®L
RM-Y181
Button Description
[] MUTING Press to turn off the sound. Press again or press
vo,
to restore sound.
[] SYSTEM OFF Press to power off the equipment programmed into
-[] the remote control, see "Programming the Remote
Control" on page 49.
_[] ........................................................................... .............
have a non-Sony VCR, you will need to program
-[_ the remote control to recognize your VCR. For
details, see "Programming the Remote Control" on
page 49.
o[_ (antenna) input, press again to switch back.
°[] [] 6iC_6RE666E ......................... ........
picture modes: Vivid, Standard, Movie and Sports.
Also available in the Video menu. See "Using the
,_[_ Video Menu" on page 34 for details.
[] SLEEP Press repeatedly until the TV displays the time in
minutes (15, 30, 45, 60, or 90) that you want the TV
to remain on before shutting off automatically.
._[_ Cancel by pressing until Sleep Off appears. While
Sleep feature is set, press once to view remaining
.o_-_ time.
[] JUMP Press to jump back and forth between two channels.
[] The TV alternates between the current channel and
the last channel that was selected.
[] TV]SAT Press to switch between the TV and SAT (satellite)
o[2-_ inputs when in SAT FUNCTION mode.
Press for a direct selection of Effect settings
(Simulated, WOW, TruSurround, Off), when the
remote is in TV FUNCTION mode.
See "Using the Audio Menu" on page 35 for details.
[] RESET Press to return to factory settings while in an
on-screen menu.
[] VOL (volume) Press (+) or (-) to adjust the volume.
[] CODE SET Use to program your remote control to operate
connected video equipment. See "Programming the
Remote Control" on page 49.
3