Sony KV-36FV300 Operating Instructions Manual page 9

Button Description
[]
POWER buttons
Press to turn on and off the TV and other audio/
video equipment you have programmed into the
remote control. For instructions, see "Programming
the Remote Control" on page 49.
[] FUNCTION buttons Press to select the equipment (TV, VCR/DVD, SAT/
CABLE) that you want to operate with the remote
control. The indicator (LED) lights up momentarily
when pushed to show which device the remote
control is operating.
[]
PIP (Picture in
Operates PIP feature. See "Using Picture in Picture
Picture)
(PIP) with Remote Y181" on page 24.
VCR (operating) Operates your VCR. The VCR must be
programmed into the remote control. For
instructions, see "Programming the Remote
Control" on page 49.
REC
Press _) button and the (_) button - above left - at
the same time to record any programs with your
VCR (the remote control must be programmed in
order to use REC.)
Fast-forward.
Play.
• Stop.
|| Pause. Press again to resume normal playback.
[] TV/VIDEO Press to cycle through available video inputs.
[]
DISPLAY
Press once to display the current time and program
status (such as channel number, channel label (if
set), video input, and video label). Press again to
turn display off.
[] MTS/SAP Press to cycle through the Multi-channel TV Sound
(MTS) options: Stereo, Auto SAP (Second Audio
Programming), and Mono.
[] (_)-(_) and Press to change channels directly. The channel
ENTER
changes after 2 seconds.
[] GUIDE Press to display the program guide of your satellite
antenna.
[] _ Press the arrow buttons to move the cursor in the
on-screen menus. Press the center button to select
or access an option.
[] MENU Press to display the on-screen menu. Press again to
exit the menu at any time.
[]
CH (channel)
Press to change channels. To scan rapidly through
the channels, press and hold down the CH+ or CH-
button.
4