Table of Contents
Advertisement
! Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
" Connect the speaker wires to the speakers first, then to the
unit.
" Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
" Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
" Do not stand or sit on the speakers. You may be injured.
" Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
" Do not let the bare speaker wires touch each other.
Incorrect
Placing the speaker system:
There is no distinction between the right and the left speakers.
Speaker grilles are removable:
Make sure nothing comes into contact with the
speaker diaphragm when you remove the
speaker grilles.
! Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Wall socket
(AC 230 V, 50 Hz)
Notes:
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
" Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
! To turn the power on
Incorrect
Press the ON/STAND-BY button to
turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
04/3/25
XLMP80HH_E.fm
TINSZA021SJZZ
XL-MP80H
1
ENGLISH
2
3
4
5
6
7
8
E-6
Advertisement
Table of Contents
