Gigaset DL500A – your perfect companion Gigaset DL500A – your perfect companion ... impressive inside and out. Go crazy for the vibrant 3.5" TFT display, first-class sound quality and elegant exterior. Your Gigaset can do a lot more than just make calls: Bluetooth, Ethernetand DECT port Connect your Gigaset to the Internet and your PC via Ethernet.
Page 3
Gigaset DL500A – your perfect companion For more information about your phone, visit www.gigaset.com/gigasetDL500A. After purchasing your Gigaset phone, please register it at www.gigaset.com/service – this will ensure any questions you may have or warranty services you request are dealt with...
Base overview Base overview 8 9 10 11 1 Adjust volume S = quieter; R = louder 8 Handsfree key During a call/message playback: handsfree/ 9 Mute key receiver volume; During a call: activate/deactivate microphone When an external call is being signalled: 10 * key ringer volume Activate/deactivate ringer (press and hold);...
Display icons Display icons Display in idle status (example) · Ã Base status 06:30 Ã (two lines) Mo Tu We Th Sa Su Current month/year 01 02 03 04 05 06 07 Mar 2010 Appointment entered in Time 08 09 10 11 12 13 14 13:52 the calendar (page 70)
Safety precautions Safety precautions Warning Read the safety precautions and the user guide before use. Explain their content and the potential hazards associated with using the telephone to your children. Use only the power adapter supplied, as indicated on the underside of the base. Use only the cables supplied for fixed line, LAN and receiver connection and connect these to the intended port only.
First steps First steps Checking the package contents 1 One base 2 One receiver to be connected to the base 3 One (coiled) cable for connecting the receiver to the base 4 One power cable for connecting the base to the mains power supply 5 One phone cable for connecting the base to the analogue fixed line (TAE RJ11 6-pin) 6 One Ethernet (LAN) cable (Cat 5 with 2 RJ45 modular jacks) for connecting the...
First steps Setting up the base The base is designed for use in dry rooms in a temperature range of +5°C to +45°C. ¤ Set up the base at a central point in the building. Please note If you wish to operate handsets from the base, consider the range of the base. This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build- ¢...
First steps Connecting the base The following diagram is an overview of all connections for your base. The individual connections are described in detail below. Follow the steps in the order given below: 1. Connect the receiver to the base. 2 Connect the base to the telephone network (analogue fixed line ).
Page 13
First steps 1. Connecting the receiver to the base Underside of the base 1. Insert the jack, which can be found on the longer straight end of the connection cable, into the connection port marked with the ^ icon on the underside of the base.
Page 14
First steps 2. Connecting the base to the telephone network Underside of the base 1. Pass one end of the phone cable (TAE connection cable with RJ11 plug) from be- hind through the recess in the housing. 2 Plug the telephone cable into the port marked with the ] icon on the under- side of the base.
Page 15
First steps 3. Connecting the base to the mains power supply 1. Insert the small jack on the power cable from the rear into the recess in the housing. 2 Plug the jack into the port marked with the \ icon on the underside of the base.
Page 16
First steps 4. Connecting the base with a router (Internet) or PC Your base features a LAN connection, via which you can connect the base to a router or PC. It is at your discretion as to whether to connect the base to a router and thus the Internet.
First steps Please note To protect your phone and its system settings from unauthorised access, please define a 4-digit number code (system PIN) known only to yourself. This code must be entered before you can register/de-register handsets or alter your phone's LAN settings.
First steps Proceeding Now you have successfully set up your base, you will certainly want to adapt it to your personal requirements. Use the following guide to quickly locate the most important subjects. If you are unfamiliar with menu-driven devices such as other Gigaset telephones, ¢...
Operating the base Operating the base Control key Below, the side of the control key that you must press in the respective operating situation is marked in black (top, bottom, right, left, centre) e.g., v for "press right on the control key" or w for "press the centre of the control key".
Operating the base Display keys The functions of the display keys change depending on the particular operating sit- uation. Example: Back Current display key functions Display keys Some important display keys: Open a menu for further functions. Options Confirm selection. Û...
Operating the base Using the menus You can access your base's functions using a menu that has a number of levels. Main menu (first menu level) ¤ When the handset is in idle status, press the right control key v to open the main menu.
Operating the base Understanding the operating steps The operating steps are shown in abbreviated form. Example: The display: ¢ Ï Settings ¢ ¢ Audio Settings Music on hold (³ = on) means: ¤ Press right on the control key v to open the main menu.
Page 23
Operating the base Audio Settings ¤ Press down on the control key s Call Volume until the Music on hold function Ringer Settings appears on the display. Advisory Tones ³ Music on hold Back Change ¤ §Change§ Press the display key to acti- vate/deactivate the function.
Menu tree Menu tree To open the main menu: Press v when the base is in idle status. Ç Select Services ¢ Call Divert Fixed Line page 32 ¢ Call Waiting page 32 ¢ Withhold # All Calls page 32 ¢...
Page 25
Menu tree Ë Messaging ¢ New SMS page 48 ¢ Incoming page 50 ¢ Draft page 48 ¢ Settings Service Centres page 52 ¢ Notification page 52 ¢ E-mail page 55 ¢ Ì Answering Machine page 61 ¢ Play Messages Network Mailbox page 68 Answering Machine...
Page 26
Menu tree Ï Settings ¢ Date/Time page 91 ¢ Audio Settings Call Volume page 87 ¢ Ringer Settings Volume page 87 Melodies Time Control Anon. Call Silencing ¢ Advisory Tones page 89 ¢ Music on hold page 89 ¢ Display Screensaver page 85 Info Ticker...
Making calls Making calls Continuing a call on a headset Recommendation If the display backlight is deactivated ¢ We recommend you assign the Headset page 86), it can be reactivated by press- function to a function key on the ¢ ing any key.
Making calls Making calls via your mobile §Dial§ Pick up the receiver or press the connection (Link2mobile) display key. §Dial§ Press to activate handsfree You can make calls from the base via the mode on the base (open listen- ¢ GSM mobile connection on your Bluetooth ing;...
Making calls Accepting a call on a headset Accepting calls to your mobile connection (Link2mobile) Recommendation You can register your GSM mobile with the We recommend you assign the Headset base via Bluetooth and accept calls to the function to a function key on the ¢...
Page 30
Making calls Call display Adopting the name from the online directory If the caller's number is saved in your direc- Instead of the phone number appearing in tory, the caller's name will be displayed. the call display, you can display the name If you have assigned a caller picture ¢...
Making calls Notes on calling line display Have you ordered the calling line display service from your network (CLIP) provider? ¤ Check whether your provider supports By default, the number of the caller is shown calling line display (CLIP) and that the in the display of your Gigaset telephone.
Making calls Switching from receiver to Please note handsfree mode In mute mode, all keys on the base are deactivated with the exception of the: Prerequisite: You are making a call via the Mute key P receiver or via the receiver with open listen- ing mode activated.
Making calls using network services Making calls using Activating/deactivating "anonymous calling" for all calls network services When the function is activated, the phone number is withheld for all calls. Network services are functions that your The withhold number function is activated network provider makes available to you.
Making calls using network services signal that another external caller is trying to Configuring settings during get through. If you have CLIP, the number of an external call the waiting caller or the corresponding directory entry is shown in the display. The caller will hear the ringing tone.
Making calls using network services The phone number is dialled. You are con- You and the other two callers (both marked by the æ icon) can hear and speak to each nected to the second participant. other simultaneously. If the participant does not answer, select the §End§...
Using lists Using lists The base switches to idle status. The display shows Auto Redial together with the phone number. The options are: The number is automatically dialled at fixed Redial list intervals (at least every 20 seconds). The Incoming message list speaker key flashes, "open listening"...
Using lists Incoming message list List entry New messages are displayed at the top. All received SMS messages are saved in the ¢ Example of list entries: incoming message list page 50). Missed Calls Answering machine list ™ Frank 10.09.10, 15:40 You can use the answering machine list to ™...
Using lists Pick up the receiver or press the handsfree An advisory tone sounds as soon as a new key d to call the selected caller back. entry appears on a list. The f key flashes (it goes off when the key is pressed). In idle §View§...
Using directories Using directories Saving number(s) in the directory – new entry ¢ The options are: <New Entry> ¢ ¤ (Local) directory page 38) You can enter data in the following fields: Public online directory and classified ¢ First Name: / Surname: directory page 43) Enter first names and/or surnames.
Using directories Caller Picture: To skip from any point in the list to the Prerequisite: Calling Line Identification start of the list (<New Entry>), press the Presentation (CLIP). red end key briefly. You can select: The directory searches for the surname. If a surname has not been added, then it –...
Page 41
Using directories Using other functions Delete List Delete all entries in the directory. Prerequisite: The directory was opened Copy List while the base was in idle status. to Internal: Send the complete list to a §Options§ Press the display key. handset (page 40).
Using directories A successful transfer is confirmed by a mes- Please note sage and confirmation tone. Any incoming calls are ignored during the vCard transfer. Please note The transfer is interrupted in the event of Receiving a vCard with Bluetooth an external incoming call.
Page 43
Using directories If the number field is already occupied, Anniversary (Date) Overwrite existing number? is displayed. Enter day/month/year in 8-digit format. §Yes§ Press the display key to over- Anniversary (Time) write the number. If you select Enter the hour/minute for the reminder §No§...
Using directories Using online directories Searching for an entry Prerequisite: You have opened the online You can use public online directories (online directory/classified directory. ¤ directories and classified directories e.g., You can enter data in the following fields: "Yellow Pages") depending on your provider. Surname: (online directory) or You can configure the online directories you Category/Name: (classified directory)
Page 45
Using directories A corresponding message will appear on the You have the following options: ¤ You can scroll through the list with q. display if no party is found to match the ¤ search criteria. You have the following §View§ Press the display key .
Using directories Starting a refined search Using the private net directory You can use the search options available in the refined search (first name and/or street) to limit the number of hits returned by a pre- Some providers offer users the option of cre- vious search.
Page 47
Using directories Please note Please note If there is no other online directory avail- You can copy numbers from a public able apart from the private online direc- directory to your private online directory ¢ tory: page 44). ¤ Press s briefly. The private online directory opens.
Making cost-effective calls Making cost-effective Displaying call duration calls The duration of each call appears in the dis- play for all external calls During the conversation Make phone calls through a network pro- vider who offers cheap rates (call-by-call). Until approximately 3 seconds after replacing the receiver.
Sending SMS (text messages) Sending SMS Sending an SMS §Options§ Press the display key. (text messages) §OK§ Send Select and press §OK§ Select and press Your phone is delivered ready to send SMS Select number with area code messages immediately. (even if you are in that area) from the directory or enter Prerequisites:...
Page 50
Sending SMS (text messages) Opening the draft list Sending SMS messages to an Ë ¢ ¢ ¢ e-mail address Messaging Draft The first list entry is displayed, for example: If your service provider supports the SMS as e-mail feature, you can also send your SMS messages to e-mail addresses.
Sending SMS (text messages) Receiving an SMS Example: All received SMS messages are saved in the 0123727859362922 incoming list. Linked SMS messages are dis- 10.10.10 09:07 played as one message. If this is too long or is not transferred completely, it is split into individual messages.
Sending SMS (text messages) Replying to or forwarding SMS If an SMS contains several numbers, the next number will be highlighted if you scroll messages ¤ down until the first number disappears from Read the SMS the display. §Options§ Press the display key. Please note You have the following options: The + symbol is not transferred for...
Sending SMS (text messages) Receiving notifications via Setting the SMS service centre You can receive notification of missed calls SMS messages are exchanged between SMS or new messages on the answering machine service centres operated by service provid- via SMS. ers.
Sending SMS (text messages) E-mail Service no.: Activating/deactivating SMS Enter the number of the e-mail service. function Send via: The Fixed Line setting cannot be If you deactivate the SMS function, you can- changed. not send or receive any SMS messages with §Save§...
Sending SMS (text messages) Troubleshooting SMS The SMS is played back. problems 1. The "display call number" feature is not acti- vated. ¥ Ask your service provider to enable this Error codes when sending feature (there is a charge for this). E0 Calling Line Identification permanently 2.
E-mail notifications E-mail notifications Opening the incoming e-mail list Your phone will notify you when new e-mail ¢ Ë Messaging ¢ messages have been received on your E-mail incoming e-mail server. Or if new e-mail messages have been received (message key f flashes): You can set your phone to periodically con- ¢...
E-mail notifications Login failed Please note Error when logging in to the incoming Many e-mail providers activate spam e-mail server. This may have the following protection measures by default. E-mail cause: messages classified as spam are stored in – The permitted number of VoIP con- a separate folder and are therefore not nections has already been reached.
E-mail notifications Deleting e-mail messages Please note If the e-mail does not contain any stand- Prerequisite: You have opened the incom- ard text, the message E-mail can’t be dis- ¢ ing e-mail list page 55) or the header or played will briefly appear. sender's address for an e-mail is displayed ¢...
Info centre – continuous Internet access from your phone Info centre – continuous Starting the info centre, selecting info services Internet access from ¢ ¢ Additional Features Info Centre your phone Your info centre menu i.e., a list of available info services is displayed.
Info centre – continuous Internet access from your phone Login failed. Operating the info centre Login has failed. Possible causes of this are: Depending on the type of info service You have not entered your login data cor- requested, you can carry out the following rectly.
Info centre – continuous Internet access from your phone ¤ You can identify a hyperlink of this type Setting options ¤ Use q to navigate to the line containing §Call§ by the fact that is shown above the right display key. ¤...
Operating the base's answering machine Operating the base's In Answer only mode, the caller hears your announcement but cannot leave a answering machine message. Operating via the base You can operate the answering machine that is integrated into the base using the keys on ¢...
Operating the base's answering machine When you switch the answering machine After recording, the announcement is on, the remaining memory time is played back for you to check. You can re- §New§ announced. If the time has not yet been set, record the announcement with a corresponding announcement is made ¢...
Page 64
Operating the base's answering machine Deleting announcements/advisory After the entry time and date have been played back (after approx. 3 seconds), a new messages ¢ ¢ Ì message assumes the status "old". Announcements ¢ Playing old messages Delete Announcemnt. / Delete Advisory Msg.
Operating the base's answering machine Playback of the current message is can- Diverting an external call to the celled. Playback of next message starts, answering machine if applicable. The f key on the handset flashes. You can divert an incoming external call to the answering machine.
Operating the base's answering machine Activating/deactivating call Setting the recording screening parameters While recording a message, you can screen a The answering machine has already been call via the base speaker or registered hand- preset at the factory. You can adjust individ- sets.
Operating the base's answering machine Operating when on the move Repeat the last five seconds of the message. (remote operation) During message playback: Delete current message. You can check and activate your answering Change the status of a previ- machine from any other telephone (hotel, ously played back message to pay phone etc.).
Using the network mailbox Using the network ¢ Ì Answering Machine ¢ mailbox Set Key 1 Network Mailbox / Answering Machine §OK§ Some providers offer answering machines Select entry and press on the network – network mailboxes. (Ø = on). You must have requested the network mail- You have selected the local Answering box from your network provider.
Page 69
Using the network mailbox Calling the answering machine via Calling the network mailbox using quick dial the message key Press and hold. If the phone number of the network mailbox is stored in the base, you can find the Mail- If you have set the network mailbox for quick box: list for the network mailboxes under the f message key.
ECO DECT: Reducing energy consumption and radiation ECO DECT: Activate/deactivate Eco Mode / Eco Mode+ ¢ ¢ Reducing energy Settings Eco Mode ¢ consumption and Eco Mode / Eco Mode+ §Change§ Press the display key (³ = on). radiation Status displays in idle display You are helping to protect the environment Display icon ¼...
Setting an appointment (calendar) Setting an appointment The selected day is outlined in orange. The current day is outlined in white. (calendar) After selecting the day: Press the centre of the control You can use your base to remind yourself of key.
Setting an appointment (calendar) Signalling appointments and Select appointment/anniver- sary. anniversaries §§View§§ Press the display key to view the In idle status, an appointment reminder is entry. signalled with the selected ringer melody You can only display anniversaries. You can and will sound for 60 seconds.
Setting the alarm clock Information about the appointment/anni- During a call, the wake-up call is only sig- versary is displayed. A missed appointment nalled by a short tone. is shown with the appointment name ¢ page 70), a missed anniversary with Deactivating the wake-up call/ name and surname.
Connecting/using other devices Connecting/using other 2. On the handset: Within approx. 60 seconds. devices ¤ Start the registration procedure on the handset in accordance with the hand- You can upgrade your base to a "PABX" by set's user guide. connecting other communication devices. You are asked to enter the current system You can register up to six handsets and six PIN of the base on your handset (default...
Connecting/using other devices De-registering handsets Making internal calls On the base: Internal calls using registered handsets are ¢ Ï ¢ free of charge. Registration ¢ De-register Handset Calling a specific handset The list of registered devices (internal par- Initiate internal call. ties) is displayed.
Connecting/using other devices Transferring a call to a handset Either: ¢ §Options§ End Active Call You can transfer an external call to a handset You are reconnected with the (connect). external participant. Prerequisite: You are conducting an exter- nal call. §Conf.§...
Connecting/using other devices Speak to both participants at the same Changing the internal time: ¤ number of an internal party §Conf.§ Press the display key to establish the conference call. Press the display The base is assigned the internal number §EndConf§...
Connecting/using other devices Using Bluetooth devices Registering Bluetooth devices To register a Bluetooth device, you need to Your base can use Bluetooth™ to communi- search for it and then add it to the list of cate wirelessly with other Bluetooth devices. known devices.
Page 79
Connecting/using other devices ¤ §No§ Cancelling/repeating current search If you press the display key , the device is not registered and the base returns to Cancel the search: the list of found devices. ¤ §Cancel§ Press the display key. If you wish to replace a device in the list, Repeat search if necessary: §Yes§...
Page 80
Connecting/using other devices Editing the list of known (trusted) Please note devices If you de-register an activated Blue- tooth device, it may try to reconnect Open list as an "unregistered device". ¢ ò Bluetooth If you de-register the activated ¢ mobile page 79), no other...
Page 81
Connecting/using other devices ¢ s (select mobile) Open list Please note §Options§ Press the display key. If you only accept the registration of a headset on a temporary basis, the Connect Mobile headset is not deleted from the §OK§ Select and press known devices list.
Page 82
Connecting/using other devices Accepting/transferring calls on the Please note headset For instructions on sending vCards to a Bluetooth device or receiving them from Prerequisite: Bluetooth is activated; a con- a Bluetooth device, see page nection has been established between the Bluetooth headset and the base ¢...
Page 83
Connecting/using other devices Bluetooth is activated on the base. The base Select at each call: This allows you to choose connects to the mobile. whether to use the fixed line connection or the GSM connection for each call: Please note Enter the number, including the You can also assign this function to a area code, and pick up the...
Connecting/using other devices Simultaneous Bluetooth Please note connections You should still use the Headset func- tion key if your headset has a P2T key. Your base can connect to both a headset and For instructions on adjusting the a data device/mobile via Bluetooth at the speaking volume on your headset, ¢...
Setting up the base Setting up the base Calendar Open calendar/enter new appointment ¢ page 70): ¢ ¢ Í Organizer Your base is preconfigured but you can Calendar change the settings to suit your individual Bluetooth requirements. Activate/deactivate Bluetooth mode ¢...
Setting up the base Line Selection Changing the display Assign line selection to a key. If a mobile language is connected to the base via Bluetooth, for each call you can choose whether the You can view the display texts in different call should take place via the fixed line or ¢...
Page 87
Setting up the base The type of info service available to your Activating/deactivating the info base is set on the Internet on the ticker Gigaset.net server. You can change the You can display text information from the settings via your PC web browser Internet (weather information etc.) that is set (see user guide for the Web configurator;...
Setting up the base ¤ You can enter data in the following fields: During a call Time Control You can adjust the volume during a call using the R and S keys. Each time Prerequisite: The date and time have already been set.
Setting up the base Setting the ringer melody Setting time control for external calls You can select various ringers, melodies or any sound from the resource directory You can specify a time period when you do (page 90). not want the base to signal external calls e.g., during the night.
Setting up the base Activating/deactivating the ringer Activating/deactivating advisory tones You can deactivate the ringer on your base before you answer a call or when the base is in idle status; the ringer can be deactivated Your handset uses advisory tones to tell you permanently or just for the current call.
Setting up the base Resource directory If you have saved a picture in an invalid file format, you will see an error message after selecting the entry. The resource directory manages sounds/ melodies, which you can use as ringers, and Playing back sounds pictures (CLIP pictures and screensavers), ¢...
Configuring the system settings Configuring the system Time: Enter the hours and minutes in 4-digit settings format via the keypad, e.g., QM
5 for 07:15 am. ¤ §Save§ You can make the following settings via the Press the display key to save menu on the base, on a registered the settings.
Configuring the system settings Setting your own area code Setting the base's IP address in LAN To transfer phone numbers (e.g., in vCards), it is essential that your area code (interna- Prerequisite: Your base is connected to a ¢ tional and local area code) is saved on the router or a PC page 15).
Configuring the system settings For IP Address Type Static: Updating the phone IP Address firmware Enter the IP address that is to be assigned to the base (overwriting the current set- Prerequisite: The base is connected to the tings). Internet (i.e., connected to a router, ¢...
Configuring the system settings Activating repeater support Please note The firmware update can take up to You can increase the range and signal three minutes. strength of your base using a repeater. You When updating from the Internet, will need to activate repeater mode. This will checks are made to ensure that no terminate any calls that are in progress at the newer version of the firmware exists.
Configuring the system settings If there are no handsets or repeaters regis- Checking the base's MAC tered to the base, the base's DECT interface address is automatically deactivated. If you switch the base to registration mode ¢ Depending on your network configuration, page 73) to reregister handsets/repeat- you may have to enter your base's MAC...
Connecting the base to a PABX Connecting the base to Setting pauses a PABX Changing the pause after line seizure The following settings are only necessary if your PABX requires them; see the PABX user You can change the length of the pause that guide.
Connecting the base to a PABX Setting recall By default, your phone is set for operation on the main connection (recall 250 ms). For operation on a PABX, you may have to change this value. Please refer to the user guide for your PABX.
Customer Service & Assistance Customer Service & Assistance You have questions? As a Gigaset customer, you can take advantage of our comprehensive serv- ice offerings. You can find help quickly in the comprehensive User Manual on the supplied product CD and in the service pages of our Gigaset online portal. Please register your phone right after purchase on www.gigaset.com/gr/service thus enabling us to provide you even with better service in case of questions or in case of a war- ranty claim.
Customer Service & Assistance Questions and answers The base does not ring. ¥ ¢ 1. The ringer is switched off. If you have any questions about the use of Activate the ringer page 89). your base, visit our website at ¥...
Page 101
Customer Service & Assistance The answering machine announces "PIN is Firmware update is not carried out. incorrect" during remote operation. 1. If Currently not possible is displayed, down- You have entered the wrong system PIN. ¥ load/update is already being carried out. ¥...
Customer Service & Assistance Authorisation Exclusion of liability Some displays may contain pixels (pic- This device is designed for the analogic tele- ture elements), which remain activated phone connection in the greek telephone or deactivated. As a pixel is made up of net.
Customer Service & Assistance Guarantee Certificate 3.Stock, Modecenterstraße 17, 1110 Vienna, Austria. Without prejudice to any claim the user (cus- Any claims that differ from or extend tomer) may have in relation to the dealer, the beyond these mentioned in this manu- customer shall be granted a manufacturer's facturer’s warranty shall be excluded, Guarantee under the conditions set out...
Environment Environment Ecological energy consumption ¢ The use of ECO DECT page 69) saves energy and makes an active contribution Our environmental mission towards protecting the environment. statement Disposal We, Gigaset Communications GmbH, bear social responsibility and are actively com- All electrical and electronic equipment must mitted to a better world.
Appendix Appendix Specifications Power consumption of the base Caring for your telephone In idle status Approx. 3.6 W Wipe the base station, charging cradle and During a call Approx. 4.3 W handset with a damp cloth (do not use sol- vent) or an antistatic cloth.
Appendix Writing and editing text Writing an SMS/names Press the relevant key several times to enter The following rules apply when writing text: Each key between Q and O is letters/characters. ¤ Enter the individual letters/characters by assigned several letters and characters. Control the cursor with u v t s.
Appendix Using Gigaset QuickSync – Data transfer During the transfer of data between the additional functions via the base and PC, the message Data transfer in PC interface progress is shown on the display. Any incoming calls are ignored during this You can connect your base to your computer time.
Appendix The corresponding source code can be GNU General Public License requested from Gigaset Communications (GPL) GmbH, but this will incur a EUR 10 process- ing charge for the provision. This request can Version 2, June 1991 be made within three years from the date of Copyright (C) 1989, 1991 Free Software Founda- purchase.
Appendix Also, for each author's protection and ours, we You may charge a fee for the physical act of trans- want to make certain that everyone understands ferring a copy, and you may, at your discretion, that there is no warranty for this free software. If offer warranty protection in exchange for a fee.
Page 110
Appendix In addition, mere aggregation of another work not 4. You may not copy, modify, sublicense, or distrib- based on the Program with the Program (or with a ute the Program except as expressly provided work based on the Program) on a volume of a stor- under this License.
Page 111
Appendix NO WARRANTY It is not the purpose of this section to induce you to infringe any patents or other property right 11. BECAUSE THE PROGRAM IS LICENSED FREE OF claims or to contest validity of any such claims; CHARGE, THERE IS NO WARRANTY FOR THE PRO- this section has the sole purpose of protecting the GRAM, TO THE EXTENT PERMITTED BY APPLICA- integrity of the free software distribution system,...
Appendix This General Public License does not permit incor- <one line to give the program's name and a porating your program into proprietary programs. brief idea of what it does.> If your program is a subroutine library, you may Copyright (C) <year> <name of author> consider it more useful to permit linking proprie- This program is free software;...
Page 113
Appendix For example, if you distribute copies of the library, For example, on rare occasions, there may be a whether gratis or for a fee, you must give the special need to encourage the widest possible use recipients all the rights that we gave you. You of a certain library, so that it becomes a de-facto must make sure that they, too, receive or can get standard.
Page 114
Appendix GNU LESSER GENERAL PUBLIC You may charge a fee for the physical act of trans- ferring a copy, and you may at your option offer LICENSE warranty protection in exchange for a fee. TERMS AND CONDITIONS FOR 2. You may modify your copy or copies of the COPYING, DISTRIBUTION AND Library or any portion of it, thus forming a work MODIFICATION...
Page 115
Appendix In addition, mere aggregation of another work not When a "work that uses the Library" uses material based on the Library with the Library (or with a from a header file that is part of the Library, the work based on the Library) on a volume of a stor- object code for the work may be a derivative work age or distribution medium does not bring the of the Library even though the source code is not.
Page 116
Appendix b) Use a suitable shared library mechanism for 8. You may not copy, modify, sublicense, link with, linking with the Library. A suitable mechanism or distribute the Library except as expressly pro- is one that (1) uses at run time a copy of the vided under this License.
Page 117
Appendix NO WARRANTY It is not the purpose of this section to induce you to infringe any patents or other property right 15. BECAUSE THE LIBRARY IS LICENSED FREE OF claims or to contest validity of any such claims; CHARGE, THERE IS NO WARRANTY FOR THE this section has the sole purpose of protecting the LIBRARY, TO THE EXTENT PERMITTED BY APPLICA- integrity of the free software distribution system...
Page 118
Appendix How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we rec- ommend making it free software that everyone can redistribute and change. You can do so by per- mitting redistribution under these terms (or, alter- natively, under the terms of the ordinary General Public License).
Glossary Glossary Codec Coder/decoder Codec is a procedure that digitalises and compresses analogue voice before it is sent via the Internet, and decodes – i.e., translates Authentication into analogue voice – digital data when Restriction of access to a network/service by voice packets are received.
Page 120
Glossary Consultation call Domain Name System You are on a call. With a consultation call, Hierarchical system that permits the assign- you interrupt the conversation briefly to ment of addresses to Domain names that establish a second connection to another are easier to memorise.
Page 121
Glossary DynDNS Fixed IP address Dynamic DNS A fixed IP address is assigned to a network Domain names and IP addresses are component manually during network con- assigned via DNS. For Dynamic IP addresses figuration. Unlike the Dynamic IP address, a this service is enhanced with "Dynamic fixed IP address does not change.
Page 122
Glossary G.729A/B Internet Standard for a Codec. Global WAN. A series of protocols known as TCP/IP have been defined for exchanging The voice quality is more likely to be lower data. with G.729A/B. As a result of the high level of compression, the necessary bandwidth is Network subscribers are identifiable via...
Page 123
Glossary Local Area Network Network Address Translation Network with a restricted physical range. Method for converting (private) A LAN can be wireless (WLAN) and/or wired. addresses to one or more (public) IP addresses. NAT enables the IP addresses of Local IP address Network subscribers (e.g., your telephone ) The local or private IP address is the address...
Page 124
Glossary Port forwarding Ringback when the call is not answered The Internet gateway (e.g., your router) for- = CCNR (Completion of calls on no reply). wards data packets from the Internet that If a party does not reply when called, a caller are directed to a certain Port to the port con-...
Page 125
Glossary Transport protocol Controls data transport between two com- Server munication partners (applications). Provides a service to other Network sub- See also: UDP, TCP, TLS. scribers (Clients). The term can indicate a computer/PC or an application. A server is addressed via IP address/Domain name Port.
Accessories Accessories Gigaset handsets Upgrade your Gigaset to a cordless PABX: Gigaset SL400 handset Genuine metal frame and keypad High-quality keypad illumination 1.8" TFT colour display Bluetooth® and mini USB Directory for up to 500 vCards Talk/standby time of up to 14 h/230 h Large font for call lists and directory Brilliant sound quality in handsfree mode: 4 handsfree settings...
Page 127
Accessories Gigaset C59H handset Social life management with room monitor and birthday reminders Individual programming of ringers with 6 VIP groups High-quality keypad with illumination 1.8" TFT colour display Directory for up to 150 vCards Talk/standby time of up to 12 h/180 h, standard batteries Large font for call lists and directory Brilliant sound quality in handsfree mode...
Page 128
Accessories Gigaset E49H handset Resistant to shocks, dust and water splashes Hardy illuminated keypad Colour display Directory for 150 entries Talk/standby time of up to 12 h/250 h, standard batteries Brilliant sound quality in handsfree mode Screensaver ECO DECT Alarm clock Room monitor SMS with up to 640 characters www.gigaset.com/gigasete49h...