Sharp MD-R3H Operation Manual page 27

(Continued)
START TRACK
3
TOC DISC
REMAIN
Track number at which recording starts
4
TOC
TOTAL
5
TOC
TOTAL
Total playing time from the
third track to the seventh track
Recording desired tracks from a compact disc
onto a MiniDisc (Track Editing)
RECORD
1
Press the CD
2
Load a compact disc and a recordable MiniDisc.
3
Select the track to start recording by turning the jog dial.
The selected track number appears.
4
Press the TRACK button.
To record a single track, skip to step 6.
5
Select the last track to record by repeatedly pressing the
TRACK button.
6
Press the START button.
Recording will start from the tracks selected in disc 1, disc 2
and disc 3, in that order. After recording, the CD and the MD
will stop automatically.
1 2 3 4 5 6 7
8 9 10 11 12
To cancel the track edit operation:
Press the CD
To stop recording:
Press the MD
It is not possible to pause recording.
3
APMS recording
1
Select tracks for APMS playback. (Page 15)
Starting Ending
track track
2
Load a recordable MiniDisc.
3
Press the START button.
APMS playback will start, and recording will start automati-
3 4 5 6 7
cally.
Programmed tracks will be recorded in order. After the unit
has finished recording the last track, recording will stop au-
tomatically.
To stop recording:
Press the MD
To record without using One-Touch Editing
Without using one-touch recording, the following operation allows
you to record from the first track.
1
Press the CD
2
Load a compact disc and a recordable MiniDisc.
3
Press the REC
The unit will enter the record stand-by mode.
4
Press the CD
To stop recording:
Press the MD
After the track number has been written on the MiniDisc, the
recording will stop. However, CD playback will continue.
E-21
MD-R3H
button.
button before pressing the START button.
button.
button.
button.
button.
button.
0 6
button.