ENGLISH Madam, Congratulations on having chosen a quality product from our company. This appliance is very easy to use. Nonetheless, in order to obtain the maximum profit from your new appliance, we suggest you spend a few minutes reading this brochure. You will find the correct indications for installation, use and mainteinance.
• Some parts of the appliance are covered by a shock- malfunctioning. Refer to your local Zanussi Service Centre. Always insist on genuine Zanussi spare proof plastic film. Remove this film before using the parts.
Control Knob for Control Knob for Control Light Control Knob rear left hotplate front right hotplate ZHM 761 X Oven Control Light OVEN FUNCTION CONTROL KNOB (FIG. 1) Oven Light - The oven light will be on without any cooking function Defrost Setting - This setting is intended to assist in thawing of frozen food.
Page 5
If this happens, call your local Zanussi Service Centre. Under no circumstances should you attempt to repair the appliance yourself. THE COOLING FAN FOR THE CONTROLS...
ELECTRONIC TIMER Program On Light Automatic Operation Light A button: Minute Minder KNOB (E) Acoustic Signal Off B button: D button: Cooking Time Manual Operation C button: End of Cooking SETTING THE TIME OF DAY (24 H CLOCK) COOKING TIME Press button B and while turning Press buttons A and B at the knob E enter the required time.
WHEN THE OVEN IS FIRST INSTALLED Once the oven has been installed: To open the oven door, always catch a) set the thermostat knob to MAX; the handle in its central part (Fig. 4). b) switch the oven function control knob to conventional cooking ( c) allow the oven to run empty for approximately 45 minutes;...
Page 8
GRILLING HINTS AND TIPS ON COOKING FISH AND Turn the oven function control knob to the relevant MEAT symbol ( ) and set the thermostat knob on the You can place meat in oven proof dishes, or directly on required temperature. With the setting , you will the oven shelf.
COOKING TABLES TRADITIONAL COOKING AND FAN DUCTED COOKING Cooking WEIGHT Traditional Cooking Fan Oven time NOTES TYPE OF DISH (GR.) temp. temp. Level Level minutes Cakes Whipped up kneading 2 (1 and 3)* 45 ~ 60 Leavened kneading 2 (1 and 3)* 20 ~ 35 Shortbread dough 2 (1 and 3)*...
• If the gasket shows to be damaged, call you local d) refit the glass lid; Zanussi Service Centre. Do not use the oven until it e) switch on the electricity supply. has been repaired.
Page 12
REMOVING THE SELF-CLEANING PANELS If the self-cleaning panels have been installed into the oven, they should be removed from time to time to allow a thorough cleaning. FO 0145 FO 0085 FO 0028 Remove the side panels. If necessary, unscrew the fixing Allow the oven to cool down, remove the drop collecting basin, screw of the back panel and remove...
The oven light does not come on Turn the oven function control knob on a function Buy a new oven light bulb, asking for it to your local Zanussi Service Centre and replace it by following the instruction provided in this booklet.
GUARANTEE - SPARE PARTS (only for BENELUX) Extension of the guarantee When calling for repairs during the period of guarantee ofthe appliance, the original invoice or receipt must be shown or 7 For motorcompressors of refrigerators/ freezers (excluding sent together with the appliance to be repaired. the starting device and thermal interrupter) a decreasing guarantee of 20% per year for a period of five years from General conditions of guarantee...
230 V following E.E.C. Directives: 73/23 - 90/683 (Low Voltage Directive); 89/336 (Electromagnetical Compatibility MANUFACTURER: Directive); ELECTROLUX ZANUSSI ELETTRODOMESTICI S.p.A. 93/68 (General Directives) Viale Bologna, 298 and subsequent modifications. 47100 FORLÌ (Italie) THIS APPLIANCE CAN BE COMBINED WITH THE FOLLOWING HOB MODELS...
TO THE ATTENTION OF THE INSTALLER The following instructions are meant to a qualified technician, in order to allow him carry out the installation in compliance with the rules in force. The building-in and the electrical connection fo the appliance must be carried out by a qualified and authorized technician only.
UNDERTOP BUILDING IN Figures 13 and 14 show two possible solutions. In Fig. 13 the appliance leans on two wood supports which are fixed to the side of the furniture unit. In Fig. 14 the appliance leans on two “C” shaped or “L” shaped metal supports, which the furniture unit feet can eventually be fixed to.
ELECTRICAL CONNECTION ELECTRICAL CONNECTION WITH THE HOB Before the appliance is connected: 1) check that the main fuse and the domestic installation This oven can be connected to hobs indicated on can support the load; page 66. The socket for connecting the hob is located 2) check that the power supply is properly earthed in at the top of the oven cabinet.