Telephone Programming Mode; Telephone Program Option Reset - Toshiba STRATA CTX User Manual

Telephone Programming Mode

The 3000-series telephones enable you to set a number of features directly from the
phone, including: Call Waiting Tone (On/Off), Flex Key, Msg Key, LCD contrast,
Speakerphone/Microphone Room Noise Sensitivity (On/Off), and Country settings.
"Telephone Programming Mode A" programs settings on a ROM chip inside the
telephone.
Some of the procedures use Feature Buttons (FB1, FB2, etc.). When your
Note
telephone is in Programming Mode, the flexible buttons are numbered as
Feature Buttons, as shown at the beginning of this appendix .
³
To place your telephone in Programming Mode
³
Press + + +
MODE" and "SELECT=". Your phone will not ring if it receives a call while in
Programming Mode.
³
To exit from Programming Mode
³
Go Off- and On-hook or wait for 30 seconds for Programming Mode to
automatically time out.

Telephone Program Option Reset

This function resets all Programming Mode option settings to their default setting.
1. Press + + +
2. Press
3. Press
4. Go off-hook, then on-hook to exit the program mode.
Strata CTX DKT/IPT Telephone
simultaneously. The LCD displays "DKT PROGRAM
(simultaneously).
V +
( LED On means reset is set to activate)
to activate reset.
10/04
DKT3000 Settings
Telephone Programming Mode
101