Dkt2000 Mode On/Off; Turn Dkt2000 Mode On/Off - Toshiba STRATA CTX User Manual
Dkt/ipt telephone with digital business telephone systems
Hide thumbs
Also See for STRATA CTX:
- Programming manual (533 pages) ,
- Manual (60 pages) ,
- User manual (38 pages)
Table of Contents
Advertisement
DKT3000 Settings
DKT2000 Mode On/Off
4. Press
5. Go off-hook, then on-hook to exit the program mode.
³
Test the Display on Large LCD Telephones (DKT3014-SDL only)
1. Press + + +
2. Press
3. Press . LCD screen is blank.
4. Press . Each segment shows three vertical lines, in all eight rows.
5. Press . Each segment contains five short horizontal lines, in all eight rows.
6. Press . Each segment contains a pattern of small dots, in all eight rows.
7. Press . All of the available characters, including numbers, display.
8. Go off-hook, then on-hook to exit the program mode.
DKT2000 Mode On/Off
If you have a cordless telephone (DKT2204-CT or DKT2304-CT) that is connected to
a 3000-series telephone, you must place your DKT into 2000-mode before connecting
the cordless telephone; otherwise, the 3000-series telephone will not work.
In 2000-mode:
• Only 16 characters by two lines display on the LCD.
• LCD Feature button does not work
• Spdial button does not work
Turn DKT2000 Mode On/Off
Important!
1. On the DKT3000 telephone, press + + +
2. Press .
3. Press
3000 telephone.
104
. This sets the LCD lightness/darkness contrast on the middle setting.
(simultaneously).
.
You must change the mode on DKT3000 telephone before connecting a
DKT2204-CT or DKT2304-CT to the DKT3000.
(or
on the DKT3014). LED On = 2000 telephone. LED Off =
(simultaneously).
Strata CTX DKT/IPT Telephone
10/04
Advertisement
Table of Contents
