Cruising In Other Conditions - Yamaha 50 Owner's Manual

Operation
2. Slightly tilt the outboard motor up to the
desired position using the power trim
and tilt switch / power tilt switch.
UP
UP
DN
3. To return the outboard motor to the nor-
mal running position, press the power
trim and tilt switch / power tilt switch and
slowly tilt the outboard motor down.
EMU28192

Cruising in other conditions

Cruising in salt water
After operating in salt water, flush the cooling
41
ZMU01935
UP
ZMU03412
water passages with fresh water to prevent
them from becoming clogged with salt de-
posits.
NOTE:
For cooling system flushing instructions, see
page 43.
Cruising in turbid water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
(not available for some models) if you use
the outboard motor in turbid or muddy water
conditions.