JVC GY-HM650U Instructions Manual page 158

A CAMERA
Enables operations related to the camera
functions.
(A P159 [Operating Camera Functions] )
B ZOOM
Enables zooming operations.
Pressing [TELE] zooms the lens to the
.
0
telephoto side and decreases the angle of
view.
Pressing [WIDE] zooms the lens to the wide-
0
angle side and increases the angle of view.
C FOCUS
Enables focusing operations.
Tapping (clicking) [MANUAL] enables you to
.
0
adjust [FAR]/[NEAR] manually.
When [MANUAL] is selected, pressing the
0
[PUSH AUTO] button (within 1 second)
automatically sets the focus on the center
frame. (One Push Auto Focus)
The camera recorder will shift to Auto Focus
0
mode temporarily and automatically adjusts
focus when the [PUSH AUTO] button is
pressed during shooting in the [MANUAL]
mode.
Release the button to return to Manual Focus
mode. (Push Auto Focus)
If you want to establish focus on a distant
0
subject, tap (click) [∞]. Release your finger
to return to Manual Focus mode.
When [AUTO] is selected, operation of the
0
[FAR] and [NEAR] buttons is disabled.
(A P48 [Focus Operation] )
158
D USER SWITCH
You can enable or disable the user buttons that
are assigned with a function.
(A P38 [Assignment of Functions to User
.
Buttons] )
E DISPLAY ON TV
You can show or hide the display and menu
characters on an external monitor as well as
perform the same operations as those on the
side control panel of this camera recorder.
Use the [ON]/[OFF] button to show or hide
.
0
the display and menu characters on the
external monitor.
You can perform similar operations as those
0
on the side control panel of this camera
recorder using the [DISPLAY]/[STATUS]/
cross-shaped buttons (JKHI)/[SET]/
[MENU]/[CANCEL] buttons.
(A P22 [Side Control Panel] )