Chapter Options; Create New Chapter Mark; Forwards To Next Chapter; Back To Start Of Chapter - Sharp TU-R252H Operation Manual

4.2. CHAPTER OPTIONS

During playback of a recording, if you press MENU, you will get to the "Chapter Options" menu. The
chapter options menu includes following options:

4.2.1. CREATE NEW CHAPTER MARK

Using "5/6" select this option and press OK. To create a chapter mark. You can set a chapter mark
anywhere you want.

4.2.2. FORWARDS TO NEXT CHAPTER

Using "5/6" select this option and press OK, to go to the next chapter. You can use this function if
there is more than one chapter.

4.2.3. BACK TO START OF CHAPTER

Using "5/6" select this option and press OK, to go to the beginning of the current chapter. This is the
last played chapter.

4.2.4. BACK TO PREVIOUS CHAPTER

Using "5/6" select this option and press OK, to go to back to the previous chapter. You can use this
function if there is more than one chapter.

5. COMMON INTERFACE

• Slot for a Common Access module: This DTR is equipped with one PCMCIA slot. When a Common
Interface CAM is inserted inside the PCMCIA slot, the system automatically detects the CAM and
displays the information within the Common Interface menu.
This DTR supports Common Interface CAMs under DVB specification. The CI CAMs include a built-in
smart card reader. Follow the instructions provided by your smartcard and CAM provider.
WARNING: Damage may occur if you insert or remove the CAM while the Digital TV Recorder is
running.
If you wish to view scrambled digital terrestrial channels you will need a Smartcard and / or a Common
Interface CAM (Conditional Access Module*) from the Service Provider of your choice. The Service
Provider is the program distributor. If you are subscribing to services from more than one Service
Provider, you may have to change between different Smartcards and / or CAM's. Please note that a
Smartcard and CAM may only be valid for a single Service Provider and a specific range of channels.
The Smartcard and the CAM may also provide access to special menus not described in this manual.
If this happens, please follow the instructions from the Service Provider. Only, "free to air" channels
are available without the Smartcard and / or the CAM.
Note: The Smartcard and / or the CAM are distributed by your Service Provider. After inserting the
card, leave it in the slot permanently. Do not remove it again, unless your Service Provider asks you to
do so. This is important, because if your Service Provider wants to download new information to the
Smartcard, the card has to be in the slot.
22