Sound Program Menu Items - Yamaha RX-A1020 Owner's Manual

Sound Program menu items

• Available items vary depending on the selected sound program or surround decoder.
■
Settings for sound programs
Item Function
Selects a surround decoder to be used
Decode Type in combination with the selected sound
program.
DSP Level Adjusts the sound field effect level.
Adjusts the delay between the direct
Initial Delay sound and presence sound field
generation.
Adjusts the delay between the direct
Surround Initial Delay sound and surround sound field
generation.
Adjusts the delay between the direct
Surround Back Initial
sound and surround back sound field
Delay
generation.
Adjusts the broadening effect of the
Room Size
presence sound field.
Adjusts the broadening effect of the
Surround Room Size
surround sound field.
Surround Back Room Adjusts the broadening effect of the
Size surround back sound field.
Adjusts the loss of the presence sound
Liveness
field.
Adjusts the loss of the surround sound
Surround Liveness
field.
Surround Back Adjusts the loss of the surround back
Liveness sound field.
Adjust the decay time of the rear
Reverb Time
reverberant sound.
Item
Reverb Delay
Reverb Level
Settings
The following items are available when you select "2ch Stereo" or "7ch Stereo".
bPLIIx Movie (bPLII
Movie), Neo:6 Cinema
Sound program
-6 dB to +3 dB (default: 0 dB)
Higher to enhance the sound
2ch Stereo
field effect, and lower to
reduce it.
1 ms to 99 ms
Higher to enhance the delay
effect, and lower to reduce it.
1 ms to 49 ms
Higher to enhance the delay
effect, and lower to reduce it.
7ch Stereo
0.1 to 2.0
Higher to enhance the
broadening effect, and lower
to reduce it.
0 to 10
Higher to enhance the
reflectivity, and lower to
reduce it.
• Available items in "7ch Stereo" vary depending on the speaker system being used.
1.0 s to 5.0 s
Higher to enrich the
reverberant sound and lower
to have clear sound.
CONFIGURATIONS ➤ Configuring sound programs/surround decoders (Sound Program menu)
Function
Adjusts the delay between the direct
sound and reverberant sound
generation.
Adjusts the volume of the reverberant
sound.
Item Function
Selects whether to
automatically bypass the
Direct DSP circuit when an
analog audio source is
played back.
Level Adjusts the entire volume. -5 to +5 (default: 0)
Adjusts the front and rear
Front / Rear Balance
volume balance.
Adjusts the right and left
Left / Right Balance
volume balance.
Adjust the height volume
Height Balance balance using the front
presence speakers.
Enables/disables
Monaural Mix
monaural sound output.
Settings
0 ms to 250 ms
Higher to enhance the delay
effect, and lower to reduce it.
0% to 100%
Higher to strengthen the
reverberant sound, and lower
to weaken it.
Settings
Auto (default), Off
-5 to +5 (default: 0)
Higher to enhance the front
side, and lower to enhance
the rear side.
-5 to +5 (default: 0)
Higher to enhance the right
side, and lower to enhance
the left side.
0 to 10 (default: 5)
Higher to enhance the
upside, and lower to
enhance the downside. (The
front presence speakers do
not produce sounds when
"Height Balance" is set to
"0".)
Off (default), On
95
En