Sound Program Menu Items - Yamaha RX-A1010 Owner's Manual

Sound Program menu items

• Available items vary depending on the selected sound program or surround decoder.
■
Settings for sound programs
Item Function
Selects a surround decoder to be used
Decode Type in combination with the selected sound
program.
DSP Level Adjusts the sound field effect level.
Adjusts the delay between the direct
Initial Delay sound and presence sound field
generation.
Adjusts the delay between the direct
Surround Initial Delay sound and surround sound field
generation.
Adjusts the delay between the direct
Surround Back Initial
sound and surround back sound field
Delay
generation.
Adjusts the broadening effect of the
Room Size
presence sound field.
Adjusts the broadening effect of the
Surround Room Size
surround sound field.
Surround Back Room Adjusts the broadening effect of the
Size surround back sound field.
Adjusts the loss of the presence sound
Liveness
field.
Adjusts the loss of the surround sound
Surround Liveness
field.
Surround Back Adjusts the loss of the surround back
Liveness sound field.
Adjust the decay time of the rear
Reverb Time
reverberant sound.
Adjusts the delay between the direct
Reverb Delay sound and rear reverberant sound
generation.
Item
Reverb Level
The following items are available when you select "2ch Stereo" or "7ch Stereo".
Sound
program
Settings
PLIIx Movie ( PLII
2ch Stereo
Movie), Neo:6 Cinema
-6dB ~ +3dB (default: 0dB)
Higher to enhance the
sound field effect and lower
to reduce.
1ms ~ 99ms
Higher to enhance the delay
effect and lower to reduce.
1ms ~ 49ms
Higher to enhance the delay
7ch Stereo
effect and lower to reduce.
0.1 ~ 2.0
Higher to enhance the
broadening effect and lower
to reduce.
0 ~ 10
• Available items in "7ch Stereo" vary depending on the speaker system being used.
Higher to enhance the
reflectivity and lower to
reduce.
1.0s ~ 5.0s
Higher to enrich the
reverberant sound and
lower to have clear sound.
0 ms ~ 250ms
Higher to enhance the delay
effect and lower to reduce.
Function
Adjusts the volume of the reverberant
sound.
Item Function
Selects whether to
automatically bypass the DSP
Direct and tone control circuits when
an analog audio source is
played back.
Adjusts the volume of the
Center Level
center channel.
Adjusts the volume of the
Surround L Level
surround left channel.
Adjusts the volume of the
Surround R Level
surround right channel.
Adjusts the volume of the
Surround Back Level
surround back channel.
Surround Back L Adjusts the volume of the
Level surround back left channel.
Adjusts the volume of the
Surround Back R
Level surround back right channel.
Adjusts the volume of the front
Front Presence L Level
presence left channel.
Adjusts the volume of the front
Front Presence R Level
presence right channel.
Settings
0% ~ 100%
Higher to strengthen the
reverberant sound and
lower to weaken.
Settings
Auto (default), Off
Select "Auto" to
bypass the circuits
(when both "Treble"
and "Bass" are set to
"Bypass").
0% ~ 100%
(default: 100%)
0% ~ 100%
(default: 50%)
0% ~ 100%
(default: 35%)
0% ~ 100%
(default: 33%)
99
En