Sound; Test Tone - Yamaha RX-A1010 Owner's Manual

4
Use the cursor keys to adjust parameters and press ENTER.
Setting range
Gain: -20.0dB ~ +6.0dB (0.5dB steps)
Center frequency: 31.3Hz ~ 16.0kHz
Q factor: 0.500 ~ 10.08
5
To exit from the menu, press ON SCREEN.
■

Test Tone

Enables/disabled the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Settings
Off (default) Does not output test tones.
Outputs test tones automatically when you adjust the speaker balance,
On
equalizer, etc.

Sound

Configures the audio output settings.
■
Lipsync
Adjusts the delay between video and audio output.
❑ Auto
Adjusts the delay between video and audio output automatically when a TV that
supports an automatic lipsync function is connected to this unit via HDMI. If necessary,
you can fine-adjust the audio output timing. "Offset" shows the difference between
automatic adjustment and fine adjustment.
Setting range
0ms ~ 250ms (1ms steps)
Default
0ms
❑ Manual
Adjusts the delay between video and audio output manually.
Setting range
0ms ~ 250ms (1ms steps)
Default
0ms
107
En