Yamaha RX-A1010 Owner's Manual page 106

❑ Center
Selects whether or not a center speaker is connected and its size.
Settings
Select this for large speaker.
Large The center speaker will produce all of the center channel frequency
components.
Select this for small speaker.
Small (default) The subwoofer will produce center channel low-frequency components
(configurable in "Bass Cross Over").
Select this when no center speaker is connected.
None
The front speakers will produce center channel audio.
❑ Surround
Selects whether or not surround speakers are connected and its size.
Settings
Select this for large speakers.
Large The surround speakers will produce all of the surround channel
frequency components.
Select this for small speakers.
Small (default) The subwoofer will produce surround channel low-frequency
components (configurable in "Bass Cross Over").
Select this when no surround speakers are connected.
None The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
❑ Surround Back
Selects whether or not surround back speakers are connected and its size.
Settings
Select this when 1 large speaker is connected.
Large x1 The surround back speaker will produce all of the surround back channel
frequency components.
Select this when 2 large speakers are connected.
Large x2 The surround back speakers will produce all of the surround back channel
frequency components.
Select this when 1 small speaker is connected.
Small x1 The subwoofer will produce surround back channel low-frequency
components (configurable in "Bass Cross Over").
Select this when 2 small speakers are connected.
Small x2
The subwoofer will produce surround back channel low-frequency
(default)
components (configurable in "Bass Cross Over").
Select this when no surround back speakers are connected.
None The surround speakers and subwoofer (or front speakers) will produce
surround back channel audio.
• "Surround Back" is automatically set to "None" when "Surround" is set to "None".
❑ Front Presence
Selects whether or not front presence speakers are connected.
Settings
Use (default) Select this when front presence speakers are connected.
None Select this when no front presence speakers are connected.
❑ Subwoofer
Selects whether or not subwoofer is connected and its phase.
Settings
Select this when a subwoofer is connected (not to reverse the phase).
Normal
The subwoofer will produce LFE (low-frequency effect) channel audio
(default)
and low-frequency components from other channels.
Use
Select this when a subwoofer is connected (reverse the phase). The
Reverse subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
Select this when no subwoofer is connected. The front speakers will
None produce LFE (low-frequency effect) channel audio and low-frequency
components from other channels.
• When the bass sound is lacking or unclear, switch the subwoofer phase.
❑ Extra Bass
Sets the speakers to produce the front channel low-frequency components.
Settings
Depending on the size of the front speakers, either the subwoofer or
Off (default)
front speakers produce the front channel low-frequency components.
Both the front speakers and subwoofer produce the front channel low-
On
frequency components.
• This setting is not available when "Subwoofer" is set to "None" or "Front" is set to "Small".
105
En