Configuring Settings In Accordance With A Playback Source (Option Menu); Option Menu Items - Yamaha RX-A1010 Owner's Manual

Configuring settings in accordance with a playback source (Option menu)

You can configure the playback-related settings in accordance with a playback source.
Since this menu is operational on the front panel (or on the TV screen), you can easily
configure the settings during playback.
1
Press OPTION.
Option
DOCK
TAG
HD
PRE AMP PARTY
ZONE ZONE ZONE
Tone Control
IN OUT 1 OUT 2 2 3 4
SLEEP
HD 3
Front display
TV screen
2
Use the cursor keys to select an item and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
Use the cursor keys ( / ) to select a setting and press ENTER.
4
To exit from the menu, press OPTION.
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR

Option menu items

• Available items vary depending on the selected input source.
• Texts in parentheses denote indications on the front display.
Item Function
Tone Control Adjusts the high-frequency range and low-frequency range
(Tone Control) of sounds.
Sets whether dynamic range (from maximum to minimum)
Adaptive DRC
is adjusted automatically in conjunction with adjusting the
(Adaptive DRC)
volume level.
CINEMA DSP 3D Mode
Enables/disables CINEMA DSP 3D.
(CINEMA DSP 3D)
Dialogue Lift Adjusts the vertical position of center sound when front
(Dialog Lift) presence speakers are used.
Extended Surround Selects the 5.1 to 7.1-channel signal playback method
(EXTD Surround) when surround back speakers are used.
Volume Trim
Corrects volume differences between input sources.
(Volume Trim)
Enhancer
Enables/disables Compressed Music Enhancer.
(Enhancer)
Audio Select Selects the audio input jack to use when more than one
(Audio Select) audio connection is made for one input source.
Shuffle Configures the shuffle setting for the iPod (p.70), USB
(Shuffle) storage device (p.75) or PC (p.78).
Repeat Configures the repeat setting for the iPod (p.70), USB
(Repeat) storage device (p.75) or PC (p.78).
Connect/Disconnect Establishes/terminates a wireless connection between your
(Connect/Disconnect) Bluetooth component and the Bluetooth receiver.
Pairing Performs pairing of your Bluetooth component and the
(Pairing) Bluetooth receiver.
Page
91
91
91
91
92
92
92
92
—
—
72
71
90
En