Hdmi - Yamaha RX-A1010 Owner's Manual

■
Processing
Enables/disables the video signal processing (resolution and aspect ratio).
Settings
Off (default) Disables the video signal processing.
Enables the video signal processing.
On
Select a resolution and an aspect ratio in "Resolution" and "Aspect".
• 720p-, 1080i- and 1080p-resolution video signals cannot be converted (p.136).
❑ Resolution
Selects a resolution to output HDMI video signals when "Processing" is set to "On".
Settings
Through Does not convert the resolution.
Selects a resolution automatically in accordance with TV
Auto (default)
resolution.
480p/576p, 720p, 1080i, Output video signals with a selected resolution.
1080p (Only the resolutions supported by your TV are selectable.)
• If you need to select a resolution that is not supported by your TV, set "MONITOR CHECK" (p.119) in the
"ADVANCED SETUP" menu to "SKIP" and try again. (Note that output videos may not be displayed on your
TV normally.)
❑ Aspect
Selects an aspect ratio to output HDMI video signals when "Processing" is set to "On".
Settings
Through (default) Does not convert the aspect ratio.
Outputs 4:3 video signals to a 16:9 TV with black bands on either
16:9 Normal
side of the screen.
• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i or 1080p
signals.

HDMI

Configures the settings related to HDMI.
■
HDMI Control
Enables/disables HDMI Control (p.137).
Settings
Off (default) Disables HDMI Control.
Enables HDMI Control.
On Configure the settings in "TV Audio Input", "ARC" and
"Standby Sync".
• To use HDMI control, you need to perform the HDMI Control link setup (p.137) after connecting HDMI
Control-compatible devices.
❑ TV Audio Input
Selects an audio input jack of this unit to be used for TV audio input when "HDMI
Control" is set to "On". The input source of this unit automatically switches to TV audio
(input jack selected in here) when the TV input is switched to its built-in tuner.
Settings
AUDIO1~4
Default
AUDIO1
• When using ARC to input TV audio to this unit, you cannot use the input jacks selected in here for
connecting an external device because the input will be used for TV audio input.
109
En