The Contrast Becomes Uneven During Printing; The Length Of Printed Images Is Inaccurate In The Feeding Direction; Images Are Printed Crooked; Documents Are Printed In Monochrome - Canon imagePROGRAF iPF6300S User Manual

Troubleshooting

The contrast becomes uneven during printing

The paper feed amount is out of adjust-
ment.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.

The length of printed images is inaccurate in the feeding direction

In the Control Panel menu, Adj. Priority
is set to Print Quality.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
12

Images are printed crooked

In the Control Panel menu, Skew Check Lv. is
set to Loose or Off.

Documents are printed in monochrome

1036
In the Advanced Settings of the printer driv-
er, Monochrome or Monochrome (Photo), is
specified in Color Mode.
The Printhead nozzles are clogged.
The contrast becomes uneven during printing
> Problems with the printing quality
Cause
Cause
Cause
Cause
>
Corrective Action
Adjust the feed amount.
(See "Adjusting the Feed Amount.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
Make sure the same type of paper is specified in the printer driver as you
have loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Corrective Action
Set Adj. Priority to Print Length in the Control Panel menu, and then ex-
ecute Adjust Length.
(See "Adjusting the Feed Amount.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Feed Slot.")
Make sure the same type of paper is specified in the printer driver as you
have loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
In the Control Panel menu, set Skew Check Lv. to High Accuracy
or Standard.
In the Advanced Settings of the printer driver, specify Color in Col-
or Mode and try printing again.
Print a test pattern to check the color ink nozzles and see if they are
clogged.
(See "Checking for Nozzle Clogging.")
→P.833
→P.784
→P.809
→P.833
→P.784
→P.809
Corrective Action
Corrective Action
→P.980
iPF6300S